EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhancing Runoff Simulation Using BTOP-LSTM Hybrid Model in the Shinano River Basin

Silang Nimai, Yufeng Ren, Tianqi Ao, Li Zhou, Hanxu Liang, Yanmin Cui

Water · 27.10.2023 · 15 (21) · 3758

DOI: 10.3390/w15213758 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Water, online erschienen am 27.10.2023. Verfasst von Silang Nimai und 5 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 79 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Laboratory of Construction and Safety of Water En-gineering of the Ministry of Water Resources, China Institute of Water Resources and Hydropower Research, National Natural Science Foundation of China, Ministry of Water Resources of the People’s Republic of China and China Three Gorges Corporation-Yangtze River Wa…, Science& Technology Department of Tibet.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Runoff simulation is an ongoing challenge in the field of hydrology. Process-based (PB) hydrological models often gain unsatisfactory simulation accuracy due to incomplete physical process representations. While the deep learning (DL) models demonstrate their capacity to grasp intricate hydrological response processes, they still face constraints pertaining to the representative training data and comprehensive hydrological observations. In order to provide unobservable hydrological variables from the PB model to the DL model, this study constructed hybrid models by feeding the output variables of the PB model (BTOP) into the DL model (LSTM) as additional input features. These variables underwent feature dimensionality reduction using the feature selection method (Pearson Correlation Coefficient, PCC) and the feature extraction method (Principal Component Analysis, PCA) before input into LSTM. The results showed that the standalone LSTM performed well across the basin, with NSE values all exceeding 0.70. The hybrid models enhanced the simulation performance of the standalone LSTM. The NSE values increased from 0.75 to nearly 0.80 in a sub-basin. Lastly, if the BTOP output is directly fed into LSTM without feature dimensionality reduction, the model’s accuracy significantly decreases due to noise interference. The NSE value decreased by 0.09 compared to the standalone LSTM in a sub-basin. The results demonstrated the effectiveness of PCC and PCA in removing redundant information within hydrological variables. These findings provide new insights into incorporating physical information into LSTM and constructing hybrid models.

Förderung

  • Key Laboratory of Construction and Safety of Water En-gineering of the Ministry of Water Resources, China Institute of Water Resources and Hydropower Research
  • National Natural Science Foundation of China, Ministry of Water Resources of the People’s Republic of China and China Three Gorges Corporation-Yangtze River Wa…
  • Science& Technology Department of Tibet
  • Sichuan University

Zitieren

APA

Nimai, S., Ren, Y., Ao, T., Zhou, L., Liang, H., & Cui, Y. (2023). Enhancing Runoff Simulation Using BTOP-LSTM Hybrid Model in the Shinano River Basin. Water, 15(21), 3758. https://doi.org/10.3390/w15213758

Vancouver

Nimai S, Ren Y, Ao T, Zhou L, Liang H, Cui Y. Enhancing Runoff Simulation Using BTOP-LSTM Hybrid Model in the Shinano River Basin. Water. 2023;15(21):3758. doi:10.3390/w15213758

BibTeX
@article{Nimai2023,
  author = {Nimai, Silang and Ren, Yufeng and Ao, Tianqi and Zhou, Li and Liang, Hanxu and Cui, Yanmin},
  title = {Enhancing Runoff Simulation Using BTOP-LSTM Hybrid Model in the Shinano River Basin},
  journal = {Water},
  year = {2023},
  volume = {15},
  number = {21},
  pages = {3758},
  doi = {10.3390/w15213758}
}
Kostenlos starten →