EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimization Design of Centrifugal Pump Auxiliary Blades Based on Orthogonal Experiment and Grey Correlation Analysis

Yi Gao, Wei Li, Leilei Ji, Weidong Cao, Yunfei Chen

Water · 05.07.2023 · 15 (13) · 2465

DOI: 10.3390/w15132465 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Water, online erschienen am 05.07.2023. Verfasst von Yi Gao und 4 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R&D Program Project, the Key International Cooperative research of National Natural Science Foundation of China, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In order to improve the hydraulic performance of multistage centrifugal pumps through the utilization of auxiliary blades, this paper presents an optimization of these blades using orthogonal experiments and grey relational analysis. The optimization scheme for auxiliary blade structure resulted as follows: Z = 2, R = 46.9 mm, and W = 2.5. In the vicinity of the optimal operating point, the optimized scheme showed a 6% increase in head compared to the original scheme. The increase in head was not significant at low flow rates, but at high flow rates, the optimized scheme exhibited a substantial increase in head, approximately 23% higher than the original scheme. Using the L9(34) orthogonal array, the quantity (Z), inner diameter (R), and width (W) of the auxiliary blades were selected as factors, each with three levels, to design nine different impeller structures. An entire flow field numerical simulation of a five-stage centrifugal pump was conducted for the nine designs, obtaining the pump head under rated working conditions. Based on the range analysis method of orthogonal experiment, the optimal design scheme for pump head performance was derived, and the primary and secondary factors affecting the pump head were found to be the inner diameter (R), width (W), and quantity (Z) of the auxiliary blades. The accuracy of the orthogonal experimental results may have been influenced by the different factor level dimensions, and a grey relational analysis was conducted to verify the accuracy of the results, on top of the range analysis of the orthogonal experiment. A prototype was created according to the optimal solution, which under optimal conditions presented a total pump efficiency of 32.6% and a pump head of 41.39 m, significantly higher than the original design without auxiliary blades. This combination of numerical simulation with orthogonal experiments and grey relational analysis is suitable for the optimization design of auxiliary blades in multistage centrifugal pumps. This approach can accurately infer the effect of the primary and secondary factors of the geometric parameters of auxiliary blades on pump performance and their corresponding optimal solutions.

Förderung

  • National Key R&D Program Project
  • the Key International Cooperative research of National Natural Science Foundation of China
  • National Natural Science Foundation of China
  • the Sixth “333 High Level Talented Person Cultivating Project” of Jiangsu Province, Funded projects of “Blue Project” in Jiangsu Colleges and Universities, Chi…
  • Open Research Subject of Key Laboratory of Fluid and Power Machinery (Xihua University), Ministry of Education
  • Wenling Fluid Machinery Technology Institute of Jiangsu University

Zitieren

APA

Gao, Y., Li, W., Ji, L., Cao, W., & Chen, Y. (2023). Optimization Design of Centrifugal Pump Auxiliary Blades Based on Orthogonal Experiment and Grey Correlation Analysis. Water, 15(13), 2465. https://doi.org/10.3390/w15132465

Vancouver

Gao Y, Li W, Ji L, Cao W, Chen Y. Optimization Design of Centrifugal Pump Auxiliary Blades Based on Orthogonal Experiment and Grey Correlation Analysis. Water. 2023;15(13):2465. doi:10.3390/w15132465

BibTeX
@article{Gao2023,
  author = {Gao, Yi and Li, Wei and Ji, Leilei and Cao, Weidong and Chen, Yunfei},
  title = {Optimization Design of Centrifugal Pump Auxiliary Blades Based on Orthogonal Experiment and Grey Correlation Analysis},
  journal = {Water},
  year = {2023},
  volume = {15},
  number = {13},
  pages = {2465},
  doi = {10.3390/w15132465}
}
Kostenlos starten →