Stationary Modal Characterization and Preliminary Rotor-Order Frequency Screening of a DTU 10 MW Composite Wind Turbine Blade with a Closed Box-Spar
Vibration · 16.11.2026 · 9 (4) · 84
DOI: 10.3390/vibration9040084 ↗Kurz gefasst
Fachartikel in der Zeitschrift Vibration, online erschienen am 16.11.2026. Verfasst von Mohamed Amine Souktani und 2 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study presents a stationary modal characterization of the composite blade of the DTU 10 MW Reference Wind Turbine with a closed box-spar, followed by a preliminary rotor-order frequency screening. A detailed layered-shell finite element model was developed in Abaqus/Standard 2023 using S4R elements, orthotropic material properties, and spanwise-varying composite layups. The first eight natural frequencies and associated mode shapes are identified for the isolated, non-rotating, and undamped blade. The first flapwise, first edgewise, and first torsional frequencies are 0.6684Hz, 0.9650Hz, and 5.8943Hz, respectively. A representative mesh study gives medium-to-fine variations of 0.34–1.49% for the selected flapwise, edgewise, and torsional modes. Comparison with published DTU 10 MW shell-model frequencies preserves the modal ordering but gives relative differences ranging from 2.26% to 28.30%, which are discussed in terms of the effective modal stiffness-to-mass ratio and differences in internal architecture, layup, boundary idealization, and shell modeling. A stationary rotor-order frequency map compares the blade modes with the 1P, 3P, 6P, and 9P orders over 6–9.6rpm. Using a 10% preliminary separation criterion, candidate coincidences are found for 6P–first-flapwise near 6.684rpm and 9P–first-edgewise near 6.433rpm, with an additional 6P proximity to the first edgewise mode near rated speed. Because rotational prestress, gyroscopic coupling, forcing amplitudes, and damping are not included in the present model, these speeds are approximate screening indicators rather than predictions of operational resonance.
Zitieren
APA
Souktani, M. A., Lakrad, F., & Boulezhar, A. (2026). Stationary Modal Characterization and Preliminary Rotor-Order Frequency Screening of a DTU 10 MW Composite Wind Turbine Blade with a Closed Box-Spar. Vibration, 9(4), 84. https://doi.org/10.3390/vibration9040084
Vancouver
Souktani MA, Lakrad F, Boulezhar A. Stationary Modal Characterization and Preliminary Rotor-Order Frequency Screening of a DTU 10 MW Composite Wind Turbine Blade with a Closed Box-Spar. Vibration. 2026;9(4):84. doi:10.3390/vibration9040084
BibTeX
@article{Souktani2026,
author = {Souktani, Mohamed Amine and Lakrad, Faouzi and Boulezhar, Abdelkader},
title = {Stationary Modal Characterization and Preliminary Rotor-Order Frequency Screening of a DTU 10 MW Composite Wind Turbine Blade with a Closed Box-Spar},
journal = {Vibration},
year = {2026},
volume = {9},
number = {4},
pages = {84},
doi = {10.3390/vibration9040084}
}
EUVIMED