EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modeling Bass Guitar String Vibration with Frequency- and Fret-Dependent Damping for Real-Time Sound Generation

Oleksii Vodka, Mariia Shapovalova, Vitalii Ovcharenko, Olena Avdieieva

Vibration · 29.07.2026 · 9 (3) · 46

DOI: 10.3390/vibration9030046 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Vibration, online erschienen am 29.07.2026. Verfasst von Oleksii Vodka und 3 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents a linear mathematical model of bass guitar string vibration with experimentally identified, frequency- and fret-dependent modal damping, aimed at high-fidelity generative sound synthesis. To identify the string damping parameters across various frets and configurations, an experimental framework was developed to benchmark four structural identification methods: half-power bandwidth, I. Yoshida’s method, Discrete Fourier Transform Interpolation, and Hilbert-transform envelope approximation. Experiments were systematically conducted on Cort C4H, Ibanez RB 630, and Yamaha bass guitars. Based on the extracted parameter space, two audio generation strategies are formulated: a spectrum-driven harmonic reconstruction method (Method 1) and a physical modeling approach utilizing spatial wave equations (Method 2). The proposed linear approximation framework effectively captures the inverse relationship between the damping factor and fret numbers specifically on the E-string, while mapping linear increases on the G and D-strings. Quantitative verification using Sobolev norm differences demonstrates good agreement between the synthesized and original signals for the spectrum-driven method (Q = 0.031–0.057) and moderate agreement for the physics-based wave equation method (Q = 0.058–0.153). This reflects a trade-off in which the former achieves tighter spectral convergence, while the latter better preserves the physical, time-domain waveform structure. As both synthesis strategies are closed-form and computationally lightweight, the model is suitable for real-time implementation and the dynamic control of playing techniques (e.g., plucking location and, in principle, slap-type excitation), without relying on heavy, multi-gigabyte audio sample libraries.

Zitieren

APA

Vodka, O., Shapovalova, M., Ovcharenko, V., & Avdieieva, O. (2026). Modeling Bass Guitar String Vibration with Frequency- and Fret-Dependent Damping for Real-Time Sound Generation. Vibration, 9(3), 46. https://doi.org/10.3390/vibration9030046

Vancouver

Vodka O, Shapovalova M, Ovcharenko V, Avdieieva O. Modeling Bass Guitar String Vibration with Frequency- and Fret-Dependent Damping for Real-Time Sound Generation. Vibration. 2026;9(3):46. doi:10.3390/vibration9030046

BibTeX
@article{Vodka2026,
  author = {Vodka, Oleksii and Shapovalova, Mariia and Ovcharenko, Vitalii and Avdieieva, Olena},
  title = {Modeling Bass Guitar String Vibration with Frequency- and Fret-Dependent Damping for Real-Time Sound Generation},
  journal = {Vibration},
  year = {2026},
  volume = {9},
  number = {3},
  pages = {46},
  doi = {10.3390/vibration9030046}
}
Kostenlos starten →