EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Vibration-Based Condition Monitoring of Ground Engaging Tools Using Finite Element-Derived Modal Features

Shasha Chen, Bernard F. Rolfe, James Griffin, Arnaldo Delli Carri, Michael P. Pereira

Vibration · 19.05.2026 · 9 (2) · 36

DOI: 10.3390/vibration9020036 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Vibration, online erschienen am 19.05.2026. Verfasst von Shasha Chen und 4 weiteren Autor:innen. Die Arbeit nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ground engaging tool (GET) wear monitoring is important for mining excavator maintenance, but progressive multi-tooth wear estimation remains insufficiently explored. This study presents a vibration-based framework for GET wear estimation during operations using modal analysis, finite element (FE) modelling, and machine learning as a supporting evaluation tool. A laboratory-scale mining bucket surrogate with detachable attached masses was used to represent progressive tooth wear through controlled mass-loss conditions. Experimental impact hammer tests under approximately free-free boundary conditions were conducted to validate the FE modal model through natural-frequency comparison and qualitative mode correspondence. The validated FE model was then used to generate a broader dataset of multi-tooth wear scenarios, from which the first ten natural frequencies were extracted as modal features. Linear Regression (LR) was adopted as a simple and interpretable baseline to evaluate both overall wear estimation and individual tooth wear estimation. High accuracy was obtained for overall wear estimation for both the non-symmetric and symmetry-augmented datasets, with R2 values of 0.9983 and 0.9976, respectively. In contrast, individual tooth prediction was more challenging, and the symmetry-augmented results showed that mirrored tooth locations can produce non-unique frequency-based signatures. An additional asymmetric FE sensitivity study further confirmed that structural symmetry can limit local wear identifiability when only global natural frequencies are used. These findings demonstrate the potential of FE-derived modal frequency features for laboratory-scale GET wear assessment, while also highlighting the limitations of frequency-only features for unique local wear localisation in symmetric structures. This is a promising approach for wear estimation during mining operations.

Zitieren

APA

Chen, S., Rolfe, B. F., Griffin, J., Carri, A. D., & Pereira, M. P. (2026). Vibration-Based Condition Monitoring of Ground Engaging Tools Using Finite Element-Derived Modal Features. Vibration, 9(2), 36. https://doi.org/10.3390/vibration9020036

Vancouver

Chen S, Rolfe BF, Griffin J, Carri AD, Pereira MP. Vibration-Based Condition Monitoring of Ground Engaging Tools Using Finite Element-Derived Modal Features. Vibration. 2026;9(2):36. doi:10.3390/vibration9020036

BibTeX
@article{Chen2026,
  author = {Chen, Shasha and Rolfe, Bernard F. and Griffin, James and Carri, Arnaldo Delli and Pereira, Michael P.},
  title = {Vibration-Based Condition Monitoring of Ground Engaging Tools Using Finite Element-Derived Modal Features},
  journal = {Vibration},
  year = {2026},
  volume = {9},
  number = {2},
  pages = {36},
  doi = {10.3390/vibration9020036}
}
Kostenlos starten →