EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Automated Mid-Surface Mesh Reconstruction for Automotive Plastic Parts Based on Point Cloud Registration

Yan Ma, Hongbin Tang, Zehui Huang, Jianjiao Deng, Jingchun Wang, Shibin Wang, Zhiguo Zhang, Zhenjiang Wu

Vehicles · 10.04.2026 · 8 (4) · 89

DOI: 10.3390/vehicles8040089 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Vehicles, online erschienen am 10.04.2026. Verfasst von Yan Ma und 7 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: MAJOR SCIENCE AND TECHNOLOGY SPECIAL PROJECT OF JILIN PROVINCE AND CHANGCHUN CITY.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In automotive Computer-Aided Engineering (CAE), the fidelity of high-quality shell element meshes is fundamentally governed by the accuracy of mid-surface geometry extraction. Conventional manual extraction for complex automotive plastic components is labor-intensive, error-prone, and often compromises mesh quality. To address these issues, this paper proposes an automated mid-surface mesh reconstruction method based on point cloud registration, establishing an integrated framework comprising “Multimodal Registration—Displacement Binding—Surface Correction.” Using a source part with an ideal mid-surface as a template, the method integrates Random Sample Consensus (RANSAC) and Iterative Closest Point (ICP) for rigid registration and Coherent Point Drift (CPD) for non-rigid registration to achieve high-precision alignment between the target and source outer-surface point clouds. Subsequently, a K-Nearest Neighbor (K-NN) search-based displacement binding mechanism smoothly transfers the outer-surface displacement field to the source mid-surface point cloud. Following position correction and surface smoothing, a complete and high-quality target mid-surface mesh is generated. Experimental results on typical plastic snap-fit components demonstrate that the normal projection error between the generated mid-surface and the manually refined “gold standard” mesh is less than 0.05 mm. The processing time per component is approximately 38 s, representing an efficiency improvement of over 73% compared to manual extraction using commercial CAE software. This method effectively mitigates common issues such as mid-surface distortion and feature loss, offering a high-precision, fully automated solution for automotive CAE pre-processing.

Förderung

  • MAJOR SCIENCE AND TECHNOLOGY SPECIAL PROJECT OF JILIN PROVINCE AND CHANGCHUN CITY

Zitieren

APA

Ma, Y., Tang, H., Huang, Z., Deng, J., Wang, J., Wang, S., Zhang, Z., & Wu, Z. (2026). Automated Mid-Surface Mesh Reconstruction for Automotive Plastic Parts Based on Point Cloud Registration. Vehicles, 8(4), 89. https://doi.org/10.3390/vehicles8040089

Vancouver

Ma Y, Tang H, Huang Z, Deng J, Wang J, Wang S, et al. Automated Mid-Surface Mesh Reconstruction for Automotive Plastic Parts Based on Point Cloud Registration. Vehicles. 2026;8(4):89. doi:10.3390/vehicles8040089

BibTeX
@article{Ma2026,
  author = {Ma, Yan and Tang, Hongbin and Huang, Zehui and Deng, Jianjiao and Wang, Jingchun and Wang, Shibin and Zhang, Zhiguo and Wu, Zhenjiang},
  title = {Automated Mid-Surface Mesh Reconstruction for Automotive Plastic Parts Based on Point Cloud Registration},
  journal = {Vehicles},
  year = {2026},
  volume = {8},
  number = {4},
  pages = {89},
  doi = {10.3390/vehicles8040089}
}
Kostenlos starten →