EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development and Verification of a FEM Model of Wheel–Rail Contact, Suitable for Large Parametric Analysis of Independent Guided Wheels

Manuel García-Troya, Miguel Sánchez-Lozano, David Abellán-López

Vehicles · 19.09.2025 · 7 (3) · 104

DOI: 10.3390/vehicles7030104 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Vehicles, online erschienen am 19.09.2025. Verfasst von Manuel García-Troya und 2 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Patentes Talgo S.L.U..

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A quasi-static FEM framework for wheel–rail contact is presented, aimed at large parametric analyses including independently rotating wheel (IRW) configurations. Unlike half-space formulations such as CONTACT, the FEM approach resolves global deformations and strongly non-Hertzian geometries while remaining computationally tractable through three key features: (i) a tailored mesh transition around the contact patch, (ii) solver settings optimized for frictional contact convergence, and (iii) an integrated post-processing pipeline for creep forces, micro-slip, and wear. The model is verified against CONTACT, an established surface-discretization reference based on the Boundary Element Method (BEM), demonstrating close agreement in contact pressure, shear stress, and stick–slip patterns across the Manchester Contact Benchmark cases. Accuracy is quantified using error metrics (MAE, RMSE), with discrepancies analyzed in high-yaw, near-flange conditions. Compared with prior FEM-based contact models, the main contributions are: (i) a rigid–flexible domain partition, which reduces 3D computational cost without compromising local contact accuracy; (ii) a frictionless preconditioning step followed by friction restoration, eliminating artificial shear-induced deformation at first contact and accelerating convergence; (iii) an automated selection of the elastic slip tolerance (slto) based on frictional-energy consistency, ensuring numerical robustness; and (iv) an IRW-oriented parametrization of toe angle, camber, and wheel spacing. The proposed framework provides a robust basis for large-scale studies and can be extended to transient or elastoplastic analyses relevant to dynamic loading, curved tracks, and wheel defects.

Förderung

  • Patentes Talgo S.L.U.

Zitieren

APA

García-Troya, M., Sánchez-Lozano, M., & Abellán-López, D. (2025). Development and Verification of a FEM Model of Wheel–Rail Contact, Suitable for Large Parametric Analysis of Independent Guided Wheels. Vehicles, 7(3), 104. https://doi.org/10.3390/vehicles7030104

Vancouver

García-Troya M, Sánchez-Lozano M, Abellán-López D. Development and Verification of a FEM Model of Wheel–Rail Contact, Suitable for Large Parametric Analysis of Independent Guided Wheels. Vehicles. 2025;7(3):104. doi:10.3390/vehicles7030104

BibTeX
@article{GarcaTroya2025,
  author = {García-Troya, Manuel and Sánchez-Lozano, Miguel and Abellán-López, David},
  title = {Development and Verification of a FEM Model of Wheel–Rail Contact, Suitable for Large Parametric Analysis of Independent Guided Wheels},
  journal = {Vehicles},
  year = {2025},
  volume = {7},
  number = {3},
  pages = {104},
  doi = {10.3390/vehicles7030104}
}
Kostenlos starten →