EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An Error Budget for the SRK and PR Equations of State: α-Function Parameterization and Volume Translation in a Reproducible Pure-Fluid Saturation-Property Benchmark

Rami Alhasan

Thermo · 09.11.2026 · 6 (4) · 85

DOI: 10.3390/thermo6040085 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Thermo, online erschienen am 09.11.2026. Verfasst von Rami Alhasan. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The Soave–Redlich–Kwong (SRK) and Peng–Robinson (PR) equations of state remain the default process-simulation models, yet their errors are usually quoted qualitatively. Both are benchmarked here in strictly predictive mode (inputs Tc, pc, ω) against reference Helmholtz-energy equations of state for 37 fluids in five chemical families: 1480 saturation states at reduced temperatures from 0.50 to 0.985, four properties (vapor pressure, enthalpy of vaporization, saturated-liquid, and saturated-vapor density), fluid-level bootstrap confidence intervals, and multiplicity-adjusted paired tests. Unlike previous assessments of saturation properties, six generalized α-functions (Soave, its 2019 update, Twu-95, the consistent generalized Twu function, Coquelet, Mahmoodi–Sedigh) are exchanged across both cubics; component-specific Twu parameters serve as an out-of-sample fitted reference, the α-function of each cubic is refitted to the same data so that the SRK–PR difference is measured at matched parameterization, and a volume-translation ladder is applied to both cubics. The α-function sets the vapor-pressure error: the classical SRK–PR vapor-pressure gap of 0.68 percentage points shrinks to 0.0–0.4 points under the other generalized α-functions and, with α-functions fitted to the same data, is 0.58 points for the one-parameter Soave form but 0.15 for a three-parameter form. The enthalpy of vaporization also carries a volumetric error from a too-ideal cubic saturated vapor. Water, methanol, and ethanol are the only fluids that no generalized α-function describes to within 2%; fitted parameters show this to be mainly a failure of generalization and of the Soave form, not of the cubic. Saturated-liquid densities follow a separate budget set by the cubic form, the translation constant, and the critical-compressibility mismatch; translated PR beats translated SRK for every fluid. Fitted α-parameters are tied to the critical constants used to fit them. The pipeline is open source.

Zitieren

APA

Alhasan, R. (2026). An Error Budget for the SRK and PR Equations of State: α-Function Parameterization and Volume Translation in a Reproducible Pure-Fluid Saturation-Property Benchmark. Thermo, 6(4), 85. https://doi.org/10.3390/thermo6040085

Vancouver

Alhasan R. An Error Budget for the SRK and PR Equations of State: α-Function Parameterization and Volume Translation in a Reproducible Pure-Fluid Saturation-Property Benchmark. Thermo. 2026;6(4):85. doi:10.3390/thermo6040085

BibTeX
@article{Alhasan2026,
  author = {Alhasan, Rami},
  title = {An Error Budget for the SRK and PR Equations of State: α-Function Parameterization and Volume Translation in a Reproducible Pure-Fluid Saturation-Property Benchmark},
  journal = {Thermo},
  year = {2026},
  volume = {6},
  number = {4},
  pages = {85},
  doi = {10.3390/thermo6040085}
}
Kostenlos starten →