EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Laminar Heat Transfer Enhancement in a Rectangular Channel Using Rectangular Wing Vortex Generators with Triangular Tips: 3D Numerical Analysis

Assadour Khanjian, Ibrahim S. Resen, Ali Al Shaer, Youssef Ezzeddine, Mahdi Awada, Ahmed Mohsin Alsayah, Jalal Faraj, Mahmoud Khaled

Thermo · 12.05.2026 · 6 (2) · 34

DOI: 10.3390/thermo6020034 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Thermo, online erschienen am 12.05.2026. Verfasst von Assadour Khanjian und 7 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Lebanese International University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Creating secondary flows that encourage fluid interchange between hot and cold regions is frequently necessary to improve convective heat transfer in compact channels. A well-known passive method for enhancing mixing and boosting thermal performance in laminar regimes is the use of vortex generators (VGs), which create streamwise and transverse vortices. Laminar forced convection in a rectangular channel with rectangular wing vortex generators with triangular tips is investigated numerically in this work. The primary goal is to assess the impact of the number of tips per wing on pressure drop and heat transfer enhancement at a fixed angle of attack (α). This study examines a single row of rectangular wing vortex generators (VGs) with triangular tips and systematically evaluates how variations in tip number influence not only the global Nusselt number and friction factor but also the three-dimensional vortex structure distribution along the channel. This approach contrasts with many previous studies that primarily focus on global performance indices or on classical delta-type VGs. ANSYS Fluent’s finite volume method is used to solve three-dimensional stable, laminar, incompressible flow and heat transfer. Two Reynolds numbers, Re = 456 and Re = 911, are simulated for different triangular-tip configurations at a fixed angle of attack of α = 30°. To connect flow structures to heat transfer behavior, area-averaged Nusselt numbers and friction factors are calculated for each case, and vortex cores and their spatial locations are examined. The findings demonstrate that heat transfer improvement is directly and significantly impacted by the VG tip arrangement. The trade-off between heat gains and pressure losses is highlighted by the fact that some tip configurations produce stronger, more persistent vortices and higher Nusselt numbers at the expense of an increased friction factor. The conclusions are limited to laminar flow conditions at α = 30°, Reynolds numbers of 456 and 911, and the investigated one-, two-, and three-tip configurations.

Förderung

  • Lebanese International University

Zitieren

APA

Khanjian, A., Resen, I. S., Shaer, A. A., Ezzeddine, Y., Awada, M., Alsayah, A. M., Faraj, J., & Khaled, M. (2026). Laminar Heat Transfer Enhancement in a Rectangular Channel Using Rectangular Wing Vortex Generators with Triangular Tips: 3D Numerical Analysis. Thermo, 6(2), 34. https://doi.org/10.3390/thermo6020034

Vancouver

Khanjian A, Resen IS, Shaer AA, Ezzeddine Y, Awada M, Alsayah AM, et al. Laminar Heat Transfer Enhancement in a Rectangular Channel Using Rectangular Wing Vortex Generators with Triangular Tips: 3D Numerical Analysis. Thermo. 2026;6(2):34. doi:10.3390/thermo6020034

BibTeX
@article{Khanjian2026,
  author = {Khanjian, Assadour and Resen, Ibrahim S. and Shaer, Ali Al and Ezzeddine, Youssef and Awada, Mahdi and Alsayah, Ahmed Mohsin and Faraj, Jalal and Khaled, Mahmoud},
  title = {Laminar Heat Transfer Enhancement in a Rectangular Channel Using Rectangular Wing Vortex Generators with Triangular Tips: 3D Numerical Analysis},
  journal = {Thermo},
  year = {2026},
  volume = {6},
  number = {2},
  pages = {34},
  doi = {10.3390/thermo6020034}
}
Kostenlos starten →