EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Fin Type and Geometry on Thermal and Hydraulic Performance in Conditions of Combined-Cycle Nuclear Power Plant with High-Temperature Gas-Cooled Reactors

Khaled A. A. Ramadan, Konstantin V. Slyusarskiy

Thermo · 09.08.2024 · 4 (3) · 382-393

DOI: 10.3390/thermo4030020 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Thermo, online erschienen am 09.08.2024. Verfasst von Khaled A. A. Ramadan und 1 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education of the Russian Federation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

One method of nuclear energy development involves using helium. Its properties make using extended surfaces obligatory. However, currently nuclear technology does not typically use finned tubes. This study explores ways of enhancing heat transfer efficiency in a high-temperature gas-cooled reactor system by using novel fin designs in the heat exchanger for residual heat removal. Four different types of fins were studied: annular, serrated, square, and helical. The effect of fin height, thickness, and number was evaluated. Serrated and helical fins demonstrated superior performance compared to conventional annular fin designs, which was expressed in enhanced efficiency. The thickness of fins was found to have the strongest influence on the efficiency, while the height and number of fins per meter had weaker effects. In addition, the study emphasized the significance of considering complex effects when optimizing fin design, like the effect of fin geometry on the velocity of helium. The findings highlight the potential of creative fin designs to greatly enhance the efficiency and dependability of gas-cooled reactor systems, opening up possibilities for advancements in nuclear power plant technology.

Förderung

  • Ministry of Science and Higher Education of the Russian Federation

Zitieren

APA

Ramadan, K. A. A., & Slyusarskiy, K. V. (2024). Effect of Fin Type and Geometry on Thermal and Hydraulic Performance in Conditions of Combined-Cycle Nuclear Power Plant with High-Temperature Gas-Cooled Reactors. Thermo, 4(3), 382-393. https://doi.org/10.3390/thermo4030020

Vancouver

Ramadan KAA, Slyusarskiy KV. Effect of Fin Type and Geometry on Thermal and Hydraulic Performance in Conditions of Combined-Cycle Nuclear Power Plant with High-Temperature Gas-Cooled Reactors. Thermo. 2024;4(3):382-393. doi:10.3390/thermo4030020

BibTeX
@article{Ramadan2024,
  author = {Ramadan, Khaled A. A. and Slyusarskiy, Konstantin V.},
  title = {Effect of Fin Type and Geometry on Thermal and Hydraulic Performance in Conditions of Combined-Cycle Nuclear Power Plant with High-Temperature Gas-Cooled Reactors},
  journal = {Thermo},
  year = {2024},
  volume = {4},
  number = {3},
  pages = {382--393},
  doi = {10.3390/thermo4030020}
}
Kostenlos starten →