EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Longitudinal Image-Based Monitoring of Abrasion-Induced Yarn Diameter Changes Under Different Sizing Conditions

Ana Kalazić, Ivana Schwarz

Textiles · 17.11.2026 · 6 (4) · 142

DOI: 10.3390/textiles6040142 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Textiles, online erschienen am 17.11.2026. Verfasst von Ana Kalazić und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Conventional yarn abrasion testing determines the number of abrasion cycles to break but does not reveal the changes in yarn geometry that occur before failure. The aim of this study was to apply and evaluate a longitudinal image-based method for monitoring changes in yarn-body diameter during progressive abrasion. Eight yarns differing in linear density and construction were investigated in untreated, conventionally sized, and pre-wetted sizing conditions. Abrasion resistance was determined using a Zweigle G551 abrasion tester, with 20 specimens tested per yarn–treatment combination. Five of these specimens were monitored longitudinally by digital microscopy at predefined abrasion intervals until breakage or the final observation. Yarn diameter was determined using Fiji (ImageJ) and the Ridge Detection plugin. A supplementary methodological evaluation showed maximum deviations of 0.40–1.22% in a parameter-sensitivity assessment and differences of −1.35% to +2.50% between automated and manual measurements on representative images. Conventional sizing yielded the highest geometric mean cycles to break for all eight yarns, although statistically significant treatment effects were detected for six yarns. Longitudinal diameter changes varied among specimens and abrasion stages, with some yarns showing an initial decrease followed by stabilization or an increase. The results demonstrate the potential of repeated image-based measurements to complement conventional abrasion testing by characterizing changes in yarn geometry before failure. Further validation of image registration and measurement repeatability is required.

Förderung

  • European Union

Zitieren

APA

Kalazić, A., & Schwarz, I. (2026). Longitudinal Image-Based Monitoring of Abrasion-Induced Yarn Diameter Changes Under Different Sizing Conditions. Textiles, 6(4), 142. https://doi.org/10.3390/textiles6040142

Vancouver

Kalazić A, Schwarz I. Longitudinal Image-Based Monitoring of Abrasion-Induced Yarn Diameter Changes Under Different Sizing Conditions. Textiles. 2026;6(4):142. doi:10.3390/textiles6040142

BibTeX
@article{Kalazi2026,
  author = {Kalazić, Ana and Schwarz, Ivana},
  title = {Longitudinal Image-Based Monitoring of Abrasion-Induced Yarn Diameter Changes Under Different Sizing Conditions},
  journal = {Textiles},
  year = {2026},
  volume = {6},
  number = {4},
  pages = {142},
  doi = {10.3390/textiles6040142}
}
Kostenlos starten →