From Textile Waste Toward a Leather Alternative: Mechanical and Abrasion Performance of Polycaprolactone-Reinforced Reclaimed Nonwoven Cotton
Textiles · 04.11.2026 · 6 (4) · 138
DOI: 10.3390/textiles6040138 ↗Kurz gefasst
Fachartikel in der Zeitschrift Textiles, online erschienen am 04.11.2026. Verfasst von Bahar Hashemian Esfahani und 10 weiteren Autor:innen. Die Arbeit nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Iowa State University Office of the Vice President for Research.
Abstract (Originalsprache)
Transforming textile waste into durable, value-added materials remains a central challenge for sustainable apparel systems. This study developed single-layer, nonwoven sheets from discarded 100% cotton textiles using a papermaking-derived wet-laid process and evaluated their potential as leather-alternative materials through a sequential two-phase approach. In Phase 1, reclaimed-cotton nonwoven sheets bio-finished with persimmon juice or konjac were benchmarked against commercial plant-based olive, cork, pineapple, and cactus leather alternatives using ASTM grab tensile and rotary-platform abrasion testing. The bio-finished sheets showed low breaking forces, limited elongation, and abrasion failure. In Phase 2, biodegradable polycaprolactone (PCL) was applied as a reinforcing finish. The resulting PCL-treated reclaimed-cotton sheets’ (RC-PCL) breaking force performance improved by over 6.5 times the nontreated nonwoven specimens and approximately 4.5 times the bio-finished nonwoven specimens. Additionally, the RC-PCL completed the 2000-cycle abrasion endpoint without through-thickness failure. Elongation remained low while the dogbone tensile test showed increases in tensile strength, strain at break, and apparent Young’s modulus after PCL-finishing. These findings indicate that biodegradable PCL-finish substantially improves the strength, cohesion, and abrasion resistance of reclaimed-cotton nonwovens, while flexibility, coating optimization, and end-of-life performance remain priorities for future leather-alternative applications to support sustainability efforts and value-added use of reclaimed materials within the textile industry.
Förderung
- Iowa State University Office of the Vice President for Research
Zitieren
APA
Esfahani, B. H., Dutta, S., Eike, R., Chang, B., Falsafi, Z., Smriti, M., Abtahi, S., Iancu, R., Mendeszoon, M., Derrick, T., & Song, G. (2026). From Textile Waste Toward a Leather Alternative: Mechanical and Abrasion Performance of Polycaprolactone-Reinforced Reclaimed Nonwoven Cotton. Textiles, 6(4), 138. https://doi.org/10.3390/textiles6040138
Vancouver
Esfahani BH, Dutta S, Eike R, Chang B, Falsafi Z, Smriti M, et al. From Textile Waste Toward a Leather Alternative: Mechanical and Abrasion Performance of Polycaprolactone-Reinforced Reclaimed Nonwoven Cotton. Textiles. 2026;6(4):138. doi:10.3390/textiles6040138
BibTeX
@article{Esfahani2026,
author = {Esfahani, Bahar Hashemian and Dutta, Shabari and Eike, Rachel and Chang, Boyce and Falsafi, Zahra and Smriti, Manu and Abtahi, Shaghayegh and Iancu, Raluca and Mendeszoon, Mark and Derrick, Tim and Song, Guowen},
title = {From Textile Waste Toward a Leather Alternative: Mechanical and Abrasion Performance of Polycaprolactone-Reinforced Reclaimed Nonwoven Cotton},
journal = {Textiles},
year = {2026},
volume = {6},
number = {4},
pages = {138},
doi = {10.3390/textiles6040138}
}
EUVIMED