EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and Evaluation of Adaptive Clothing for Diverse Body Shapes Using Auxetic Knitted Structures

Aqsa Imran, Muhammad Babar Ramzan, Sheheryar Mohsin Qureshi, Maham Raza, Shahood uz Zaman

Textiles · 07.04.2026 · 6 (2) · 44

DOI: 10.3390/textiles6020044 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Textiles, online erschienen am 07.04.2026. Verfasst von Aqsa Imran und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Traditional ready-to-wear garments can mostly not conform to different body shapes because of the adoption of the generic sizing system, which leads to the local strain of concentration and morphological misfit. Auxetic structures, which have a negative Poisson’s ratio, permit enhanced redistribution of stress and geometry and allow deformation. Two auxetic knitted structures were developed by using 100% polyester and 100% nylon yarns with a fabric density of 41 Wales and 40 courses per inch. Characterization of the initial fabrics involved checking the behavior of negative Poisson’s ratio (NPR) where the polyester line (P1) structure shows the highest auxeticity, with a NPR of approximately −0.4 and peak strain reductions of 80–90%, as well as air permeability, moisture management, bend test, compression, roughness, friction properties and stiffness tests to check the mechanical and comfort-related performances. The standardized tunic garment was modeled in CLO 3D on three female body shapes—hourglass, pear and rectangle—with a constant size of 34. The fit map showed a strain of 91.49% in auxetic and 509.75% in single-jersey fabric at the hip area of the pear body shape when measuring fabric and body interaction. The findings indicate lower peak strain levels, which ascertain that increased adaptability is possible and support its use in the development of adaptive ready-to-wear garments.

Zitieren

APA

Imran, A., Ramzan, M. B., Qureshi, S. M., Raza, M., & Zaman, S. U. (2026). Design and Evaluation of Adaptive Clothing for Diverse Body Shapes Using Auxetic Knitted Structures. Textiles, 6(2), 44. https://doi.org/10.3390/textiles6020044

Vancouver

Imran A, Ramzan MB, Qureshi SM, Raza M, Zaman SU. Design and Evaluation of Adaptive Clothing for Diverse Body Shapes Using Auxetic Knitted Structures. Textiles. 2026;6(2):44. doi:10.3390/textiles6020044

BibTeX
@article{Imran2026,
  author = {Imran, Aqsa and Ramzan, Muhammad Babar and Qureshi, Sheheryar Mohsin and Raza, Maham and Zaman, Shahood uz},
  title = {Design and Evaluation of Adaptive Clothing for Diverse Body Shapes Using Auxetic Knitted Structures},
  journal = {Textiles},
  year = {2026},
  volume = {6},
  number = {2},
  pages = {44},
  doi = {10.3390/textiles6020044}
}
Kostenlos starten →