EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Circular Valorization of Post-Industrial Textile Waste in Thermal-Insulating Cementitious Ceiling Sheets

Kavini Vindya Fernando, Charith Akalanka Dodangodage, Vinalee Maleeshi Seneviratne, Sanduni Maleesha Jayasinghe, Dhammika Dharmaratne, Geethaka Nethsara Gamage, Ranoda Hasandee Halwatura, U. S. W. Gunasekera, Rangika Umesh Halwatura

Textiles · 27.02.2026 · 6 (1) · 27

DOI: 10.3390/textiles6010027 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Textiles, online erschienen am 27.02.2026. Verfasst von Kavini Vindya Fernando und 8 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 78 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Sri Lanka Institute of Information Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The construction sector faces increasing pressure to reduce the embodied energy of building materials while valorizing industrial waste streams. This study evaluates the direct incorporation of post-industrial textile waste (100% cotton and cotton–polyester blends) in its native form to develop high-performance cementitious ceiling sheets. Composites were fabricated under a controlled hydraulic compaction pressure of 2.0 MPa, optimized to achieve matrix densification while preserving the integrity of the fibrous network. Viscoelastic recovery of the compressed fibers induced a hierarchical double-porosity architecture characterized by macro-voids and hollow fiber lumens. This microstructural evolution reduced thermal conductivity to 0.091 W/m·K, approximately 50% lower than commercial cement–fiber benchmarks—without compromising mechanical compliance. Scanning Electron Microscopy (SEM) revealed a mechanistic decoupling between water absorption and dimensional stability. Although the CP15 formulation (15 wt.% cotton–polyester) exhibited high moisture uptake (~21%), thickness swelling remained limited to 1.35%. This dimensional stability is attributed to the hydrophobic polyester framework, which bridges microcracks and constrains hygroscopic expansion within the cellulosic phase. The optimized CP15 composite achieved a Modulus of Rupture (MOR) of 8.75 MPa, exceeding ISO 8336 Category C, Class 2 requirements. Despite increased thickness, the areal density (10.84 kg/m2) remains compatible with standard gypsum-grade suspension systems, eliminating the need for structural modification. These findings establish a scalable, direct-valorization strategy for circular construction materials delivering enhanced thermal insulation and robust performance under tropical climatic conditions.

Förderung

  • Sri Lanka Institute of Information Technology

Zitieren

APA

Fernando, K. V., Dodangodage, C. A., Seneviratne, V. M., Jayasinghe, S. M., Dharmaratne, D., Gamage, G. N., Halwatura, R. H., Gunasekera, U. S. W., & Halwatura, R. U. (2026). Circular Valorization of Post-Industrial Textile Waste in Thermal-Insulating Cementitious Ceiling Sheets. Textiles, 6(1), 27. https://doi.org/10.3390/textiles6010027

Vancouver

Fernando KV, Dodangodage CA, Seneviratne VM, Jayasinghe SM, Dharmaratne D, Gamage GN, et al. Circular Valorization of Post-Industrial Textile Waste in Thermal-Insulating Cementitious Ceiling Sheets. Textiles. 2026;6(1):27. doi:10.3390/textiles6010027

BibTeX
@article{Fernando2026,
  author = {Fernando, Kavini Vindya and Dodangodage, Charith Akalanka and Seneviratne, Vinalee Maleeshi and Jayasinghe, Sanduni Maleesha and Dharmaratne, Dhammika and Gamage, Geethaka Nethsara and Halwatura, Ranoda Hasandee and Gunasekera, U. S. W. and Halwatura, Rangika Umesh},
  title = {Circular Valorization of Post-Industrial Textile Waste in Thermal-Insulating Cementitious Ceiling Sheets},
  journal = {Textiles},
  year = {2026},
  volume = {6},
  number = {1},
  pages = {27},
  doi = {10.3390/textiles6010027}
}
Kostenlos starten →