EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Corrugated Vivaldi Antenna Architecture for 5G CubeSat Communications: Sub-6 GHz Experimental Validation and Millimeter-Wave Simulation Scaling

Rivana El Hajj Chehade, Elias Rachid, Sawsan Sadek, Georges Zakka El Nashef

Telecom · 02.07.2026 · 7 (4) · 83

DOI: 10.3390/telecom7040083 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Telecom, online erschienen am 02.07.2026. Verfasst von Rivana El Hajj Chehade und 3 weiteren Autor:innen. Die Arbeit nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents a corrugated Vivaldi antenna architecture targeting sub-6 GHz and millimeter-wave frequency bands for 5G CubeSat applications, combining experimental validation at sub-6 GHz with a simulation-based scaling study at 26.5 GHz. Existing CubeSat antenna designs either target a single frequency band or rely on complex metamaterial structures incompatible with nanosatellite fabrication constraints. To address this gap, a single-element corrugated Vivaldi antenna measuring 90 mm × 80 mm is designed, fabricated on FR-4 substrate, and experimentally validated at 3.5 GHz, confirming a wide impedance bandwidth of 2.75 GHz and a peak gain of 9.6 dBi. The strong agreement between CST Studio Suite simulations and measurements validates the electromagnetic solver configuration, which is subsequently applied, as a simulation-based design study, to a geometrically scaled version on Taconic RF-60A substrate operating at 26.5 GHz. The miniaturized single-element version achieves a simulated 17 GHz ultra-wideband response and 6 dBi gain in a 7.32 mm × 6.32 mm footprint. Two- and four-element array configurations at 26.5 GHz demonstrate systematic simulated gain progression to 9 dBi and 13 dBi, respectively, with beamwidth narrowing from 49° to 30°. All 26.5 GHz designs are simulated with lossy copper metallization (σ=5.8×107 S/m) and are entirely simulation-based; experimental mmWave validation is a designated target for future work. These results establish a validated design and scaling roadmap for corrugated Vivaldi antennas spanning sub-6 GHz and millimeter-wave bands, offering a cost-effective and CubeSat-compatible solution for high-data-rate inter-satellite communication links.

Zitieren

APA

Chehade, R. E. H., Rachid, E., Sadek, S., & Nashef, G. Z. E. (2026). Corrugated Vivaldi Antenna Architecture for 5G CubeSat Communications: Sub-6 GHz Experimental Validation and Millimeter-Wave Simulation Scaling. Telecom, 7(4), 83. https://doi.org/10.3390/telecom7040083

Vancouver

Chehade REH, Rachid E, Sadek S, Nashef GZE. Corrugated Vivaldi Antenna Architecture for 5G CubeSat Communications: Sub-6 GHz Experimental Validation and Millimeter-Wave Simulation Scaling. Telecom. 2026;7(4):83. doi:10.3390/telecom7040083

BibTeX
@article{Chehade2026,
  author = {Chehade, Rivana El Hajj and Rachid, Elias and Sadek, Sawsan and Nashef, Georges Zakka El},
  title = {Corrugated Vivaldi Antenna Architecture for 5G CubeSat Communications: Sub-6 GHz Experimental Validation and Millimeter-Wave Simulation Scaling},
  journal = {Telecom},
  year = {2026},
  volume = {7},
  number = {4},
  pages = {83},
  doi = {10.3390/telecom7040083}
}
Kostenlos starten →