EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

From Topology Optimization to Experimental Verification: Development of a Compact Compliant Gripper for Robotic Kiwifruit Harvesting

Hung Phan Le, Ben McGuinness, Christoff Venter, Eva Prinz, Mike Duke, Shen Hin Lim, Ajit Pal Singh

Technologies · 20.11.2026 · 14 (11) · 771

DOI: 10.3390/technologies14110771 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Technologies, online erschienen am 20.11.2026. Verfasst von Hung Phan Le und 6 weiteren Autor:innen. Die Arbeit nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Business, Innovation and Employment.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Robotic kiwifruit harvesting requires compact grippers that accommodate fruit-size variation while transmitting sufficient force without excessive stress. This study examined the effects of the compliance constraint, volume fraction, and intermediate pseudo-density threshold on a displacement-driven topology-optimized gripper, then re-optimized a selected layout within a shortened domain and refined critical features. The monolithic PA2200 gripper was manufactured by selective laser sintering and assessed through finite element analysis, stereo digital image correlation, and load-cell testing. The 132 mm × 102 mm × 10 mm prototype weighed 17.96 g. Simulations predicted approximately ±11 mm of unloaded finger motion and per-finger reaction forces of 50.99 and 59.17 N at representative small- and large-fruit positions, respectively. The predicted peak stress reached 27.96 MPa during extended opening, remaining below the allowable stress of 28.2 MPa established using a safety factor of 1.5. With measured input displacements imposed in simulations, trial-averaged mean absolute output-displacement errors were below 0.06 mm. Loaded comparisons using measured input forces and output positions as boundary conditions showed a maximum absolute per-finger force difference of 0.97 N. These results show that the compact design can retain nominal motion and force transmission while satisfying the adopted stress criterion; laboratory comparisons support its local mechanical response under matched conditions but do not establish damage-free fruit handling or harvesting performance.

Förderung

  • Ministry of Business, Innovation and Employment

Zitieren

APA

Le, H. P., McGuinness, B., Venter, C., Prinz, E., Duke, M., Lim, S. H., & Singh, A. P. (2026). From Topology Optimization to Experimental Verification: Development of a Compact Compliant Gripper for Robotic Kiwifruit Harvesting. Technologies, 14(11), 771. https://doi.org/10.3390/technologies14110771

Vancouver

Le HP, McGuinness B, Venter C, Prinz E, Duke M, Lim SH, et al. From Topology Optimization to Experimental Verification: Development of a Compact Compliant Gripper for Robotic Kiwifruit Harvesting. Technologies. 2026;14(11):771. doi:10.3390/technologies14110771

BibTeX
@article{Le2026,
  author = {Le, Hung Phan and McGuinness, Ben and Venter, Christoff and Prinz, Eva and Duke, Mike and Lim, Shen Hin and Singh, Ajit Pal},
  title = {From Topology Optimization to Experimental Verification: Development of a Compact Compliant Gripper for Robotic Kiwifruit Harvesting},
  journal = {Technologies},
  year = {2026},
  volume = {14},
  number = {11},
  pages = {771},
  doi = {10.3390/technologies14110771}
}
Kostenlos starten →