EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Force–Depth–Stiffness Modeling of Rotary Ball-Burnished Dimples on an External Cylinder for Adaptive Guideway Stiffness Mapping

Kirill A. Bashmur, Alexander V. Zagulyaev, Ivan S. Nekrasov

Technologies · 19.08.2026 · 14 (8) · 514

DOI: 10.3390/technologies14080514 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Technologies, online erschienen am 19.08.2026. Verfasst von Kirill A. Bashmur und 2 weiteren Autor:innen. Die Arbeit nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study develops a theoretical and computational mechanics framework for regular dimples produced by rotary ball burnishing on an external cylindrical surface. The model combines the local quadratic ball–cylinder gap, an effective mean indentation pressure Heff, an unloading factor λ, residual dimple geometry, a Greenwood–Williamson pressure–approach law for the load-bearing lands, and an elastic spectral reference calculation. The dimple area fraction Fn is obtained from the periodic union of loaded-imprint footprints for the nominal stiffness maps, whereas the residual profile determines the specific oil capacity, defined as retained cavity volume per unit nominal area. Numerical checks include algebraic consistency, mesh-converged periodic FFT-BEM calculations, and a separate sinusoidal benchmark. For a representative 3mm ball and 25mm cylinder with Heff=2GPa, the model maps burnishing force and texture pitch to idle- and working-pressure secant stiffness. Within the stated range Fn≤0.20, the low-fidelity index preserves the ordering of all evaluated non-tied design points; the mean and maximum differences from the spectral reference are 6.6% and 15.2%. A discrete force–pitch grid yields three feasible points under illustrative stiffness windows and two candidates after non-dominated sorting and secondary selection by specific oil capacity. The selected textures reduce idle-pressure stiffness slightly more than working-pressure stiffness, increasing the nonlinearity ratio from 5.70 to 5.91. The framework provides a reproducible model-based tool for preliminary force–pitch selection; application to a specific material–process pair requires identification of Heff, λ, and the load-bearing-land response and validation against process-specific measurements.

Zitieren

APA

Bashmur, K. A., Zagulyaev, A. V., & Nekrasov, I. S. (2026). Force–Depth–Stiffness Modeling of Rotary Ball-Burnished Dimples on an External Cylinder for Adaptive Guideway Stiffness Mapping. Technologies, 14(8), 514. https://doi.org/10.3390/technologies14080514

Vancouver

Bashmur KA, Zagulyaev AV, Nekrasov IS. Force–Depth–Stiffness Modeling of Rotary Ball-Burnished Dimples on an External Cylinder for Adaptive Guideway Stiffness Mapping. Technologies. 2026;14(8):514. doi:10.3390/technologies14080514

BibTeX
@article{Bashmur2026,
  author = {Bashmur, Kirill A. and Zagulyaev, Alexander V. and Nekrasov, Ivan S.},
  title = {Force–Depth–Stiffness Modeling of Rotary Ball-Burnished Dimples on an External Cylinder for Adaptive Guideway Stiffness Mapping},
  journal = {Technologies},
  year = {2026},
  volume = {14},
  number = {8},
  pages = {514},
  doi = {10.3390/technologies14080514}
}
Kostenlos starten →