EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Structural Parameters on Performance of Dissolvable Metal Ball Seat Sealing Rings in Frac Plug

Shunzuo Qiu, Zhaoliang Zhu, Yan Yang, Qin Liu, Yan Jiang, Caixia Xian

Technologies · 25.05.2026 · 14 (6) · 319

DOI: 10.3390/technologies14060319 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Technologies, online erschienen am 25.05.2026. Verfasst von Shunzuo Qiu und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Sichuan Provincial Natural Science Foundation Project, Sichuan SMT printing engineering technology research center project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aiming at the problems of insufficiently tight sealing of all-metal dissolvable frac plugs and the poor fracturing effect in the extraction of shale gas, the effects of structural parameters on the performance of metal dissolvable ball seat sealing rings was analyzed using numerical simulation and an experimental method. The key structural factors affecting performance were identified. The problem of stress concentration at the contact position between the sealing ring and the slip of the existing structure was discovered. To solve the above problems, a combination structure sealing ring was designed. Then the performance comparison analysis of the two structures and optimal structural parameters were carried out. Under the same sealing force, the combination structure sealing ring can be smoothly sealed, and the stress distribution of the upper sealing ring is uniform. This indicates that the performance of the combination structure sealing ring is superior, and the optimal cone angle and thickness obtained are 9° and 17 mm, respectively. Based on the optimized structural parameters, experiments were conducted. After being pressurized at room temperature to 51 MPa and stabilized for 15 min, the pressure gradually decreased to 47.4 MPa, indicating a secondary setting. After unloading, the lower end face of the dissolvable ball seat has no liquid leakage. Under high temperature, a pressure of 51 Mpa was applied; the pressure inside the wellbore remained basically unchanged. During the process of applying pressures of 60 MPa and 70 MPa, there was also a decrease in pressure, indicating the presence of secondary sealing. The above results indicate that the optimized combined metal sealing ring has strict sealing and good pressure-bearing performance. At the same time, the reliability of the simulation results was verified. The designed sealing ring was applied to the shale gas horizontal well deployed in Changning block, China. The application results show that when the displacement remains unchanged, the casing pressure increases from 51 MPa to 60 MPa, and continues to maintain the displacement. The pressure did not fall back to 51 MPa, proving that the formation pressure is released. The successful on-site application once again verifies the safe and reliable performance of the all-metal sealing ring.

Förderung

  • Sichuan Provincial Natural Science Foundation Project
  • Sichuan SMT printing engineering technology research center project

Zitieren

APA

Qiu, S., Zhu, Z., Yang, Y., Liu, Q., Jiang, Y., & Xian, C. (2026). Effect of Structural Parameters on Performance of Dissolvable Metal Ball Seat Sealing Rings in Frac Plug. Technologies, 14(6), 319. https://doi.org/10.3390/technologies14060319

Vancouver

Qiu S, Zhu Z, Yang Y, Liu Q, Jiang Y, Xian C. Effect of Structural Parameters on Performance of Dissolvable Metal Ball Seat Sealing Rings in Frac Plug. Technologies. 2026;14(6):319. doi:10.3390/technologies14060319

BibTeX
@article{Qiu2026,
  author = {Qiu, Shunzuo and Zhu, Zhaoliang and Yang, Yan and Liu, Qin and Jiang, Yan and Xian, Caixia},
  title = {Effect of Structural Parameters on Performance of Dissolvable Metal Ball Seat Sealing Rings in Frac Plug},
  journal = {Technologies},
  year = {2026},
  volume = {14},
  number = {6},
  pages = {319},
  doi = {10.3390/technologies14060319}
}
Kostenlos starten →