EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Reproducibility of 3D-Printed Breast Phantoms in Mammography and Breast Tomosynthesis

Kristina Bliznakova, Vencislav Nastev, Nikolay Dukov, Ivan Buliev, Zhivko Bliznakov, Valentina Dobreva, Chavdar Bachvarov, Georgi Todorov, Deyan Grancharov

Technologies · 23.04.2026 · 14 (5) · 251

DOI: 10.3390/technologies14050251 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Technologies, online erschienen am 23.04.2026. Verfasst von Kristina Bliznakova und 8 weiteren Autor:innen. Die Arbeit nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union – NextGenerationEU Government of Bulgaria.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The development of realistic breast phantoms is critical for the evaluation of imaging systems and quantitative image analysis methods. In this work, breast samples derived from the same digital model were produced using 3D printing technology and evaluated for structural similarity and reproducibility. Four independently manufactured phantoms were imaged using mammography and breast tomosynthesis. Radiomic features were extracted from regions of interest in order to assess inter-phantom variability. The results showed very good agreement between the four printed phantoms. Most first-order and GLCM radiomic features exhibited very low inter-phantom variability, indicating consistent structural and intensity characteristics. Neighborhood-based texture features showed slightly higher variability, reflecting their sensitivity to local structural differences. Fractal and power spectrum analyses also confirmed the high structural similarity of the phantoms. These results indicate that the proposed manufacturing approach can produce reproducible breast imaging phantoms suitable for mammography and tomosynthesis imaging studies, with potential applications in imaging system evaluation and radiomic research.

Förderung

  • European Union – NextGenerationEU Government of Bulgaria

Zitieren

APA

Bliznakova, K., Nastev, V., Dukov, N., Buliev, I., Bliznakov, Z., Dobreva, V., Bachvarov, C., Todorov, G., & Grancharov, D. (2026). Reproducibility of 3D-Printed Breast Phantoms in Mammography and Breast Tomosynthesis. Technologies, 14(5), 251. https://doi.org/10.3390/technologies14050251

Vancouver

Bliznakova K, Nastev V, Dukov N, Buliev I, Bliznakov Z, Dobreva V, et al. Reproducibility of 3D-Printed Breast Phantoms in Mammography and Breast Tomosynthesis. Technologies. 2026;14(5):251. doi:10.3390/technologies14050251

BibTeX
@article{Bliznakova2026,
  author = {Bliznakova, Kristina and Nastev, Vencislav and Dukov, Nikolay and Buliev, Ivan and Bliznakov, Zhivko and Dobreva, Valentina and Bachvarov, Chavdar and Todorov, Georgi and Grancharov, Deyan},
  title = {Reproducibility of 3D-Printed Breast Phantoms in Mammography and Breast Tomosynthesis},
  journal = {Technologies},
  year = {2026},
  volume = {14},
  number = {5},
  pages = {251},
  doi = {10.3390/technologies14050251}
}
Kostenlos starten →