Motion Planning and Control of Mobile Manipulators for Grasping-on-the-Move Tasks
Technologies · 02.04.2026 · 14 (4) · 210
DOI: 10.3390/technologies14040210 ↗Kurz gefasst
Fachartikel in der Zeitschrift Technologies, online erschienen am 02.04.2026. Verfasst von Zegang Sun und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Sichuan Provincial Engineering Technology Research Center for Prefabricated Cabin Power Equipment, Sichuan Province Central Guidance on Local Science and Technology Development Special Project.
Abstract (Originalsprache)
Currently, most mobile manipulators employ a “Stop-and-Grasp” strategy, where the base of the manipulator stops before the arm executes the grasp. However, achieving “Grasping-on-the-Move” actions—where the robot grasps a target while the base is in motion—remains a significant challenge due to the coupling of base and arm dynamics. To address this, we propose a two-phase collaborative motion planning framework. In the first phase (long-range approach), we introduce a spatially constrained visual servoing (SC-VS) method. By establishing a dynamic safety corridor based on the chassis path, this method ensures robust target tracking and obstacle avoidance for the arm during base motion. In the second phase (close-range grasping), to seize the brief grasping opportunity, we propose a Constrained-Sampling RRT-Connect (CSR-RRT-Connect) algorithm. By restricting the sampling region based on target prediction, this algorithm significantly reduces planning time. Comparative experiments demonstrate that our method achieves a 92% success rate at a base speed of 0.3 m/s, significantly outperforming the 46% success rate of baseline methods, while exhibiting superior robustness against dynamic operational disturbances and perception noise.
Förderung
- Sichuan Provincial Engineering Technology Research Center for Prefabricated Cabin Power Equipment
- Sichuan Province Central Guidance on Local Science and Technology Development Special Project
Zitieren
APA
Sun, Z., Zuo, S., Jiang, Q., Zhang, P., & Yu, J. (2026). Motion Planning and Control of Mobile Manipulators for Grasping-on-the-Move Tasks. Technologies, 14(4), 210. https://doi.org/10.3390/technologies14040210
Vancouver
Sun Z, Zuo S, Jiang Q, Zhang P, Yu J. Motion Planning and Control of Mobile Manipulators for Grasping-on-the-Move Tasks. Technologies. 2026;14(4):210. doi:10.3390/technologies14040210
BibTeX
@article{Sun2026,
author = {Sun, Zegang and Zuo, Shanlin and Jiang, Qiang and Zhang, Peng and Yu, Jiping},
title = {Motion Planning and Control of Mobile Manipulators for Grasping-on-the-Move Tasks},
journal = {Technologies},
year = {2026},
volume = {14},
number = {4},
pages = {210},
doi = {10.3390/technologies14040210}
}
EUVIMED