Additive Manufacturing in Space: Technologies, Flight Heritage, and Materials
Technologies · 05.03.2026 · 14 (3) · 165
DOI: 10.3390/technologies14030165 ↗Kurz gefasst
Fachartikel in der Zeitschrift Technologies, online erschienen am 05.03.2026. Verfasst von Emilia Georgiana Prisăcariu und 2 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 136 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Additive manufacturing (AM) is increasingly recognized as a critical enabler for sustainable space exploration, offering on-demand fabrication, reduced reliance on Earth-based resupply, and enhanced mission autonomy. Over the past decade, in-space AM has progressed from early polymer extrusion experiments aboard the International Space Station (ISS) to the demonstration of multi-material capabilities involving polymers, metals, ceramics, recycling systems, and in situ resource utilization (ISRU) concepts. This review provides a comprehensive synthesis of AM technologies developed for space applications, with emphasis on demonstrated flight heritage, process behavior under microgravity and vacuum conditions, and materials validated in orbit. The paper surveys major AM process families relevant to space, including fused filament fabrication, directed energy deposition, ceramic stereolithography, bioprinting, and closed-loop recycling systems. Key ISS-based platforms—such as the Additive Manufacturing Facility, Ceramic Manufacturing Module, and Refabricator—are reviewed to assess technological maturity and system-level integration. Materials performance across polymers, metals, ceramics, and regolith-based feedstocks is discussed, highlighting the influence of microgravity, thermal transport, and environmental exposure. By comparing in-space results with terrestrial and reduced-gravity studies, this review identifies consistent trends, critical limitations, and remaining knowledge gaps, providing a structured perspective on the readiness of in-space additive manufacturing for future orbital and deep-space missions.
Zitieren
APA
Prisăcariu, E. G., Dumitrescu, O., & Roșu, R. A. (2026). Additive Manufacturing in Space: Technologies, Flight Heritage, and Materials. Technologies, 14(3), 165. https://doi.org/10.3390/technologies14030165
Vancouver
Prisăcariu EG, Dumitrescu O, Roșu RA. Additive Manufacturing in Space: Technologies, Flight Heritage, and Materials. Technologies. 2026;14(3):165. doi:10.3390/technologies14030165
BibTeX
@article{Priscariu2026,
author = {Prisăcariu, Emilia Georgiana and Dumitrescu, Oana and Roșu, Raluca Andreea},
title = {Additive Manufacturing in Space: Technologies, Flight Heritage, and Materials},
journal = {Technologies},
year = {2026},
volume = {14},
number = {3},
pages = {165},
doi = {10.3390/technologies14030165}
}
EUVIMED