Additive Manufacturing in Space: Process Physics, Qualification, and Future Directions
Technologies · 14.02.2026 · 14 (2) · 121
DOI: 10.3390/technologies14020121 ↗Kurz gefasst
Fachartikel in der Zeitschrift Technologies, online erschienen am 14.02.2026. Verfasst von Oana Dumitrescu und 3 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 152 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Romanian Ministry of Research, Innovation and Development.
Abstract (Originalsprache)
Additive manufacturing has emerged as a key enabling technology for in-space manufacturing, offering the potential to reduce logistics mass, enhance mission autonomy, and support long-duration exploration. The suppression of gravity-driven phenomena fundamentally alters melt pool dynamics, heat transfer, surface-tension-dominated flow, and defect formation, limiting the direct transferability of terrestrial AM process knowledge to space applications. This paper reviews the current understanding of metallic additive manufacturing process physics under reduced gravity, with emphasis on melt pool behavior, dimensional stability, and in situ monitoring constraints. Approaches for qualification and certification are critically examined, including the applicability of existing AM standards, the role of digital twins and model-based verification, and emerging strategies for space-based validation. Enabling technologies such as autonomous and AI-assisted fabrication, compact hardware architectures, and alternative energy sources are discussed in the context of reliable in-space operation. By synthesizing current developments and identifying key limitations and open challenges, the review provides a roadmap for advancing additive manufacturing toward operational readiness, supporting sustainable exploration, in-space infrastructure development, and long-duration human presence beyond low Earth orbit.
Förderung
- Romanian Ministry of Research, Innovation and Development
Zitieren
APA
Dumitrescu, O., Prisăcariu, E. G., Roșu, R. A., & Cozzoni, E. (2026). Additive Manufacturing in Space: Process Physics, Qualification, and Future Directions. Technologies, 14(2), 121. https://doi.org/10.3390/technologies14020121
Vancouver
Dumitrescu O, Prisăcariu EG, Roșu RA, Cozzoni E. Additive Manufacturing in Space: Process Physics, Qualification, and Future Directions. Technologies. 2026;14(2):121. doi:10.3390/technologies14020121
BibTeX
@article{Dumitrescu2026,
author = {Dumitrescu, Oana and Prisăcariu, Emilia Georgiana and Roșu, Raluca Andreea and Cozzoni, Enrico},
title = {Additive Manufacturing in Space: Process Physics, Qualification, and Future Directions},
journal = {Technologies},
year = {2026},
volume = {14},
number = {2},
pages = {121},
doi = {10.3390/technologies14020121}
}
EUVIMED