Structural Design of a Multi-Stage Variable Stiffness Manipulator Based on Low-Melting-Point Alloys
Technologies · 05.08.2025 · 13 (8) · 338
DOI: 10.3390/technologies13080338 ↗Kurz gefasst
Fachartikel in der Zeitschrift Technologies, online erschienen am 05.08.2025. Verfasst von Moufa Ye und 5 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Outstanding Youth Fund of Fujian Province Natural Science Foundation, General Program of the National Natural Science Foundation of China.
Abstract (Originalsprache)
Soft manipulators have garnered significant research attention in recent years due to their flexibility and adaptability. However, the inherent flexibility of these manipulators imposes limitations on their load-bearing capacity and stability. To address this, this study compares various variable stiffness technologies and proposes a novel design concept: leveraging the phase-change characteristics of low-melting-point alloys (LMPAs) with distinct melting points to fulfill the variable stiffness requirements of soft manipulators. The pneumatic structure of the manipulator is fabricated via 3D-printed molds and silicone casting. The manipulator integrates a pneumatic working chamber, variable stiffness chambers, heating devices, sensors, and a central channel, achieving multi-stage variable stiffness through controlled heating of the LMPAs. A steady-state temperature field distribution model is established based on the integral form of Fourier’s law, complemented by finite element analysis (FEA). Subsequently, the operational temperatures at which the variable stiffness mechanism activates, and the bending performance are experimentally validated. Finally, stiffness characterization and kinematic performance experiments are conducted to evaluate the manipulator’s variable stiffness capabilities and flexibility. This design enables the manipulator to switch among low, medium, and high stiffness levels, balancing flexibility and stability, and provides a new paradigm for the design of soft manipulators.
Förderung
- Outstanding Youth Fund of Fujian Province Natural Science Foundation
- General Program of the National Natural Science Foundation of China
Zitieren
APA
Ye, M., Guo, L., Wang, A., Dong, W., Gao, Y., & Dong, H. (2025). Structural Design of a Multi-Stage Variable Stiffness Manipulator Based on Low-Melting-Point Alloys. Technologies, 13(8), 338. https://doi.org/10.3390/technologies13080338
Vancouver
Ye M, Guo L, Wang A, Dong W, Gao Y, Dong H. Structural Design of a Multi-Stage Variable Stiffness Manipulator Based on Low-Melting-Point Alloys. Technologies. 2025;13(8):338. doi:10.3390/technologies13080338
BibTeX
@article{Ye2025,
author = {Ye, Moufa and Guo, Lin and Wang, An and Dong, Wei and Gao, Yongzhuo and Dong, Hui},
title = {Structural Design of a Multi-Stage Variable Stiffness Manipulator Based on Low-Melting-Point Alloys},
journal = {Technologies},
year = {2025},
volume = {13},
number = {8},
pages = {338},
doi = {10.3390/technologies13080338}
}
EUVIMED