EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Tuning of a CFD Model for External Ballistics, Followed by Analyses of the Principal Influences on the Drag Coefficient of the .223 Rem Caliber

Jiří Maxa, Pavla Šabacká, Robert Bayer, Tomáš Binar, Petr Bača, Jana Švecová, Jaroslav Talár, Martin Vlkovský, Lenka Dobšáková

Technologies · 08.05.2025 · 13 (5) · 190

DOI: 10.3390/technologies13050190 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Technologies, online erschienen am 08.05.2025. Verfasst von Jiří Maxa und 8 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Defence of the Czech Republic, specific graduate research of the Brno University of Technology, IG Agency of Mendel University in Brno, Faculty of AgriSciences.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents the subject of external ballistics. The presented research employs a contemporary methodological approach, integrating theoretical analysis, CFD simulations, and experimental measurements. External ballistics is characterized by a wide spectrum of physical phenomena that influence projectile trajectory. This contribution focuses on the analysis of drag force acting on a .223 rem caliber projectile in both subsonic and supersonic regimes. Based on experimental findings, a CFD model was refined and subsequently used to evaluate the drag force and drag coefficient, with a comparative analysis performed against G1 and G7 ballistic coefficient functions. Furthermore, the effect of the barrel length on the resultant outcome was assessed. The validated CFD model was employed to analyze the characteristics of shock waves generated at the projectile’s nose and their impact on the drag force, along with the influence of ambient temperature, particularly within the supersonic domain.

Förderung

  • Ministry of Defence of the Czech Republic
  • specific graduate research of the Brno University of Technology
  • IG Agency of Mendel University in Brno, Faculty of AgriSciences

Zitieren

APA

Maxa, J., Šabacká, P., Bayer, R., Binar, T., Bača, P., Švecová, J., Talár, J., Vlkovský, M., & Dobšáková, L. (2025). The Tuning of a CFD Model for External Ballistics, Followed by Analyses of the Principal Influences on the Drag Coefficient of the .223 Rem Caliber. Technologies, 13(5), 190. https://doi.org/10.3390/technologies13050190

Vancouver

Maxa J, Šabacká P, Bayer R, Binar T, Bača P, Švecová J, et al. The Tuning of a CFD Model for External Ballistics, Followed by Analyses of the Principal Influences on the Drag Coefficient of the .223 Rem Caliber. Technologies. 2025;13(5):190. doi:10.3390/technologies13050190

BibTeX
@article{Maxa2025,
  author = {Maxa, Jiří and Šabacká, Pavla and Bayer, Robert and Binar, Tomáš and Bača, Petr and Švecová, Jana and Talár, Jaroslav and Vlkovský, Martin and Dobšáková, Lenka},
  title = {The Tuning of a CFD Model for External Ballistics, Followed by Analyses of the Principal Influences on the Drag Coefficient of the .223 Rem Caliber},
  journal = {Technologies},
  year = {2025},
  volume = {13},
  number = {5},
  pages = {190},
  doi = {10.3390/technologies13050190}
}
Kostenlos starten →