EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Solid State Transformers: A Review—Part I: Stages of Conversion and Topologies

Dragoș-Mihail Predescu, Ștefan-George Roșu

Technologies · 10.02.2025 · 13 (2) · 74

DOI: 10.3390/technologies13020074 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Technologies, online erschienen am 10.02.2025. Verfasst von Dragoș-Mihail Predescu und 1 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 272 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Program for Research of the National Association of Technical Universities.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Solid State Transformers (SSTs) represent an emerging technology that seeks to improve upon traditional Low-Frequency Transformers (LFTs) with Medium-Frequency Transformers (MFTs) of reduced core size while incorporating modular converter structures as their input and output stages. In addition to magnetic circuit reduction, SSTs provide enhanced functionalities such as power factor correction, voltage regulation, and the capability to interface with various sources and loads. However, owing to the novelty of SSTs and the various proposed implementations, a general review would difficult to follow and might not be able to adequately analyze each aspect of SST structures. This complexity underscores the need for a new division of information and classification based on the number of conversion stages, which is the main contribution of this study. Converter functionalities are derived based on the number of stages. Utilizing these functionalities along with existing and proposed implementations, converter topologies are identified and then detailed in terms of their respective functionalities, advantages, disadvantages, and control schemes. The subsequent chapters provide a comparative analysis of the different topologies and present existing SST implementations. For this analysis, metrics such as the number of SST stages, power flow, voltage control, power quality, and component count are used. Based on the resulting analysis, single-stage SSTs are a promising solution that emphasize economy and high power density, while multi-stage SSTs are also a viable solution thanks to their ease of control and flexible design. This paper constitutes the first part of a two-part review. The second part will focus on the degrees of design freedom (such as multilevel structures/cells) and provide a generalized approach to modularity within SST systems.

Förderung

  • National Program for Research of the National Association of Technical Universities

Zitieren

APA

Predescu, D., & Roșu, Ș. (2025). Solid State Transformers: A Review—Part I: Stages of Conversion and Topologies. Technologies, 13(2), 74. https://doi.org/10.3390/technologies13020074

Vancouver

Predescu D, Roșu Ș. Solid State Transformers: A Review—Part I: Stages of Conversion and Topologies. Technologies. 2025;13(2):74. doi:10.3390/technologies13020074

BibTeX
@article{Predescu2025,
  author = {Predescu, Dragoș-Mihail and Roșu, Ștefan-George},
  title = {Solid State Transformers: A Review—Part I: Stages of Conversion and Topologies},
  journal = {Technologies},
  year = {2025},
  volume = {13},
  number = {2},
  pages = {74},
  doi = {10.3390/technologies13020074}
}
Kostenlos starten →