Threshold-Crossing Limits and Model-Fidelity Assessment of Supervised NLM Error Shaping for MMC Circulating-Current Control
Symmetry · 02.11.2026 · 18 (11) · 1840
DOI: 10.3390/sym18111840 ↗Kurz gefasst
Fachartikel in der Zeitschrift Symmetry, online erschienen am 02.11.2026. Verfasst von Junwei Huang und 7 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Finite-level nearest-level modulation (NLM) couples modular multilevel converter (MMC) internal dynamics to a discontinuous arm-voltage execution error. Building on an established proportional reduced-order quasi-resonant (P-ROQR) circulating-current regulator and a Fourier-based NLM error-correction concept, this study investigates the interaction between harmonic pre-distortion and circulating-current control under discrete NLM execution. A unified energy/error model and an exact threshold-crossing representation show that sub-level pre-distortion can affect the converter only when an integer insertion command changes. However, threshold opportunity alone does not guarantee closed-loop improvement. A causal cycle-wise quantization-error shaping (QES) layer is therefore combined with a threshold-aware efficacy supervisor that rejects candidate shaping actions when they do not alter the discrete actuator or are predicted to increase the circulating-current response. During large operating-point changes, the QES path is temporarily blocked and is reactivated after coefficient reacquisition and smooth recovery. The fixed QES implementation is first examined in mean-arm and individual-submodule models, where its performance is shown to depend strongly on numerical and model fidelity. In the individual-submodule model, fixed QES reduces the selected high-order component but increases the total circulating-current rms and peak. In the ten-submodule-per-arm model, supervised QES reduces circulating-current rms relative to both fixed QES and the P-ROQR baseline, although its steady-state current peak and switching-transition count remain above the baseline values. During the tested power step, transient blocking keeps the peak circulating-current deviation close to the P-ROQR result while reducing the additional excursion introduced by fixed QES. These results support the use of local prediction to screen candidate shaping actions within the investigated simulation conditions; performance in larger MMC systems and hardware implementations remains to be established.
Zitieren
APA
Huang, J., Chao, W., Dai, L., Wang, J., Lin, X., Zhang, L., Wang, Y., & Liao, J. (2026). Threshold-Crossing Limits and Model-Fidelity Assessment of Supervised NLM Error Shaping for MMC Circulating-Current Control. Symmetry, 18(11), 1840. https://doi.org/10.3390/sym18111840
Vancouver
Huang J, Chao W, Dai L, Wang J, Lin X, Zhang L, et al. Threshold-Crossing Limits and Model-Fidelity Assessment of Supervised NLM Error Shaping for MMC Circulating-Current Control. Symmetry. 2026;18(11):1840. doi:10.3390/sym18111840
BibTeX
@article{Huang2026,
author = {Huang, Junwei and Chao, Wujie and Dai, Liyu and Wang, Jinke and Lin, Xinyi and Zhang, Liye and Wang, Yuhong and Liao, Jianquan},
title = {Threshold-Crossing Limits and Model-Fidelity Assessment of Supervised NLM Error Shaping for MMC Circulating-Current Control},
journal = {Symmetry},
year = {2026},
volume = {18},
number = {11},
pages = {1840},
doi = {10.3390/sym18111840}
}
EUVIMED