EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Pull-Out Performance and Load Transfer Mechanism of Pressure-Type Rock Anchor with Grouted Interface

Xiaofeng Yang, Penghui Xue, Siyao Liu, Zhaoyang Wang, Dadong Li, Panpan Guo, Yixian Wang

Symmetry · 02.08.2026 · 18 (8) · 1305

DOI: 10.3390/sym18081305 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Symmetry, online erschienen am 02.08.2026. Verfasst von Xiaofeng Yang und 6 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundamental Research Funds for the Central Universities.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Pressure-type rock anchors transfer tendon force to the grouted body through an end bearing plate, placing the grout predominantly in compression; however, their load-transfer mechanisms and axisymmetric stress-field distributions under varying loads remain insufficiently understood. This study combines laboratory physical model testing and three-dimensional numerical simulations to investigate the vertical pull-out performance and load-transfer characteristics of pressure-type rock anchors. Scaled pull-out tests were first conducted to investigate the effects of anchorage length and anchor rebar diameter on load–displacement behavior and ultimate bearing capacity. A finite element model was then established and validated against the experimental results. The results indicate that the axial force of the grout exhibits a highly non-linear distribution, reaching its peak at the borehole bottom. An effective load-transfer length of approximately 3.5 to 3.7 m is identified, within which 90% of the axial force is dissipated. Unlike tension-type anchors, the anchor rebar functions as an integral tension-transmission member, maintaining a near-constant axial force profile outside the bottom boundary zone. Furthermore, the surrounding rock exhibits distinct axisymmetric responses, characterized by funnel-shaped vertical displacement diffusion and bulb-shaped principal stress contours. These findings provide a theoretical framework for optimizing anchorage length and understanding the symmetric mechanical boundary responses of pressure-type anchors in rock mass stabilization.

Förderung

  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Yang, X., Xue, P., Liu, S., Wang, Z., Li, D., Guo, P., & Wang, Y. (2026). Pull-Out Performance and Load Transfer Mechanism of Pressure-Type Rock Anchor with Grouted Interface. Symmetry, 18(8), 1305. https://doi.org/10.3390/sym18081305

Vancouver

Yang X, Xue P, Liu S, Wang Z, Li D, Guo P, et al. Pull-Out Performance and Load Transfer Mechanism of Pressure-Type Rock Anchor with Grouted Interface. Symmetry. 2026;18(8):1305. doi:10.3390/sym18081305

BibTeX
@article{Yang2026,
  author = {Yang, Xiaofeng and Xue, Penghui and Liu, Siyao and Wang, Zhaoyang and Li, Dadong and Guo, Panpan and Wang, Yixian},
  title = {Pull-Out Performance and Load Transfer Mechanism of Pressure-Type Rock Anchor with Grouted Interface},
  journal = {Symmetry},
  year = {2026},
  volume = {18},
  number = {8},
  pages = {1305},
  doi = {10.3390/sym18081305}
}
Kostenlos starten →