Coupling Effects of Dynamic Loads and Friction on the Gear Systems of Radial 3D Braiding Machines
Symmetry · 21.07.2026 · 18 (7) · 1234
DOI: 10.3390/sym18071234 ↗Kurz gefasst
Fachartikel in der Zeitschrift Symmetry, online erschienen am 21.07.2026. Verfasst von Lingling Yao und 3 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Application of AI in Toxic and Harmful Gas Detection in Coal Mines, Development of Advanced Auxiliary System for Underground Trackless Rubber-Tired Vehicles, The Talent Introduction Project of Lingling Yao.
Abstract (Originalsprache)
During the radial braiding process, spindle motion induces periodic load excitations as they move with the turntable. Based on the kinematics analysis of the spindles, this study derives a tension-load torque mapping model and establishes a multi-degree-of-freedom (MDOF) nonlinear dynamic model that incorporates dynamic torque and gear tooth friction. The system’s governing differential equations are solved numerically using the fourth-order Runge–Kutta method to obtain steady-state responses under various combinations of tension and rotational speed. Results indicate that increasing yarn tension reduces the stability margin of the system’s phase trajectories, and the basin of attraction area for periodic motion decreases approximately linearly as the tension increases. Furthermore, friction exhibits dual characteristics across different frequency regimes: at operating frequencies below 1.05, friction acts as a damping mechanism to maintain system stability; however, beyond this threshold, the friction reversal mechanism triggers chaotic behavior.
Förderung
- Application of AI in Toxic and Harmful Gas Detection in Coal Mines
- Development of Advanced Auxiliary System for Underground Trackless Rubber-Tired Vehicles
- The Talent Introduction Project of Lingling Yao
Zitieren
APA
Yao, L., Yang, Z., Liang, D., & Wei, C. (2026). Coupling Effects of Dynamic Loads and Friction on the Gear Systems of Radial 3D Braiding Machines. Symmetry, 18(7), 1234. https://doi.org/10.3390/sym18071234
Vancouver
Yao L, Yang Z, Liang D, Wei C. Coupling Effects of Dynamic Loads and Friction on the Gear Systems of Radial 3D Braiding Machines. Symmetry. 2026;18(7):1234. doi:10.3390/sym18071234
BibTeX
@article{Yao2026,
author = {Yao, Lingling and Yang, Zhilin and Liang, Dongsheng and Wei, Chenglong},
title = {Coupling Effects of Dynamic Loads and Friction on the Gear Systems of Radial 3D Braiding Machines},
journal = {Symmetry},
year = {2026},
volume = {18},
number = {7},
pages = {1234},
doi = {10.3390/sym18071234}
}
EUVIMED