EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Flow Interference Between Two Tandem Square Cylinders: Passive Control Using a Downstream Flat Plate

Sarath R S, R Ajith Kumar, K Suresh Kumar

Symmetry · 09.07.2026 · 18 (7) · 1162

DOI: 10.3390/sym18071162 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Symmetry, online erschienen am 09.07.2026. Verfasst von Sarath R S und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Flow interference among bluff bodies can strongly amplify or suppress unsteady aerodynamic forces and induced vibrations thereof. However, the behaviour of tandem square-cylinder interference and its passive control in the laminar regime remains insufficiently quantified, particularly near the known critical tandem spacing ratio (L/D ≈ 4.5). This study systematically analysed and determined how a splitter plate placed downstream of the second cylinder modulates the aerodynamic forces, symmetry of vortex shedding, wake topology, and associated wake metrics in two-dimensional incompressible laminar flows. Unsteady finite-volume numerical simulations were conducted using ANSYS Fluent (2022 R1) at Re = 150. The tandem cylinder spacing (L) was varied over L/D = 2–6 (D, the cylinder side length), and the splitter gap (G) was varied over G/D = 1–6. The splitter plate acted as a strong wake stabiliser at small gaps (G/D = 1), where vortex shedding was largely suppressed and lift fluctuations were minimal (for example, Cl,rms ≈ 0.055), and the DC experienced negative drag (Cd ≈ −0.13), consistent with elongated and weakly rolled-up shear layers and extended recirculation. The splitter plate acted as a sharp control “switch” at a critical splitter gap G/D ≈ 2, where the wake transitioned to unsteady shedding, the Strouhal number (St) jumped to values that remained nearly constant for G/D = 2–6, and the wake metrics indicated earlier roll-up (reduced vortex formation length and recirculation length) and greater lateral spreading (increased wake width). The outcome was influenced by the tandem regimes: for 1.5 < L/D < 4, persistent shielding and negative downstream drag predominated. However, near the critical gap (L/D ≈ 4.5), the restoration of shear-layer impingement at G/D ≥ 2 resulted in a downstream drag surpassing the isolated-cylinder baseline (Cd,SC ≈ 1.49) by approximately 3–8%. In the co-shedding regime, when L/D = 5, there was a notable increase in drag, approximately 12.3% more than that on an isolated cylinder. Conversely, when L/D = 6, the system approached aerodynamic independence without any amplification (approaching the single-cylinder value). The interference metrics showed a maximum combined drag reduction of ~68.6% at L/D = 4.5 and G/D = 1, whereas the upstream cylinder drag was only weakly affected. The results of the present study establish splitter placement as an effective passive control method for suppressing or recovering interference-driven unsteadiness, thereby supporting designs in bluff-body aerodynamics, heat-transfer equipment, and vibration-mitigation systems.

Zitieren

APA

S, S. R., Kumar, R. A., & Kumar, K. S. (2026). Flow Interference Between Two Tandem Square Cylinders: Passive Control Using a Downstream Flat Plate. Symmetry, 18(7), 1162. https://doi.org/10.3390/sym18071162

Vancouver

S SR, Kumar RA, Kumar KS. Flow Interference Between Two Tandem Square Cylinders: Passive Control Using a Downstream Flat Plate. Symmetry. 2026;18(7):1162. doi:10.3390/sym18071162

BibTeX
@article{S2026,
  author = {S, Sarath R and Kumar, R Ajith and Kumar, K Suresh},
  title = {Flow Interference Between Two Tandem Square Cylinders: Passive Control Using a Downstream Flat Plate},
  journal = {Symmetry},
  year = {2026},
  volume = {18},
  number = {7},
  pages = {1162},
  doi = {10.3390/sym18071162}
}
Kostenlos starten →