Simulation-Based Parameter Analysis and Experimental Validation of a Permanent Magnet Eddy Current Damper
Symmetry · 08.07.2026 · 18 (7) · 1159
DOI: 10.3390/sym18071159 ↗Kurz gefasst
Fachartikel in der Zeitschrift Symmetry, online erschienen am 08.07.2026. Verfasst von Huaiyang Wang und 4 weiteren Autor:innen. Die Arbeit nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: 2024 Anhui Province Postdoctoral Research Project, Key Project of Excellent Young Teacher Cultivation in 2024, Industrial Collaborative Innovation Special Fund Project of Anhui Polytechnic University & Jiujiang District.
Abstract (Originalsprache)
To address the issue of fatigue failure in conventional coil springs applied in automotive suspensions, a design method for a permanent magnet eddy current damper (PMECD) is proposed. Firstly, the working principle of the proposed method is introduced, and its dynamic model is established to identify the key parameters that affect its primary performance. Subsequently, numerical models for repulsive force and eddy current damping force are established. Simulation results show that the system has the characteristics of axial and radial symmetry, and the magnetic yoke and copper sleeve reduce magnetic leakage, thereby verifying the rationality of the structural design of the proposed method. The thicker the permanent magnet, the greater the magnetic force produced, and there exists a nonlinear relationship between the magnetic force and displacement. In comparison, the magnetic force generated increases with the thickness of the copper sleeve, exhibiting a trend of first increasing and then decreasing. With the increase in the air gap, its impact on the magnetic force presents a variation trend of first decreasing, then increasing, and finally decreasing again. Although the increase in speed leads to little change in the magnetic force, the eddy current damping force gradually increases, which in turn results in an increase in solid losses. Test results show that the differences between theoretical and simulation calculations and experimental results are less than 5%, which verifies the correctness of the method; compared with the eddy current damper without a copper sleeve, the equivalent damping ratio of the eddy current damper with a copper sleeve increases by 103.7%. This study provides a theoretical basis for the future design and optimization of PMECDs.
Förderung
- 2024 Anhui Province Postdoctoral Research Project
- Key Project of Excellent Young Teacher Cultivation in 2024
- Industrial Collaborative Innovation Special Fund Project of Anhui Polytechnic University & Jiujiang District
- Anhui Intelligent Mine Technology and Equipment Engineering Research Center
- Open Fund Project of Anhui Province Joint Construction Discipline Key Laboratory for Quality and Reliability of Intelligent Equipment
- Anhui Province Key Laboratory of Advanced Numerical Control & Servo Technology
- Start-up Fund for Scientific Research
- Horizontal project
Zitieren
APA
Wang, H., Li, L., Zhang, Z., Wang, X., & Xu, M. (2026). Simulation-Based Parameter Analysis and Experimental Validation of a Permanent Magnet Eddy Current Damper. Symmetry, 18(7), 1159. https://doi.org/10.3390/sym18071159
Vancouver
Wang H, Li L, Zhang Z, Wang X, Xu M. Simulation-Based Parameter Analysis and Experimental Validation of a Permanent Magnet Eddy Current Damper. Symmetry. 2026;18(7):1159. doi:10.3390/sym18071159
BibTeX
@article{Wang2026,
author = {Wang, Huaiyang and Li, Linchao and Zhang, Zhitao and Wang, Xiangdong and Xu, Manman},
title = {Simulation-Based Parameter Analysis and Experimental Validation of a Permanent Magnet Eddy Current Damper},
journal = {Symmetry},
year = {2026},
volume = {18},
number = {7},
pages = {1159},
doi = {10.3390/sym18071159}
}
EUVIMED