EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Tolerance Compliant Repetitive Contouring Through Spatial Iterative Learning and Reference Shaping

Shunjie Zhu, Lei Wang, Yiyang Chen, Qian Xie

Symmetry · 03.06.2026 · 18 (6) · 965

DOI: 10.3390/sym18060965 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Symmetry, online erschienen am 03.06.2026. Verfasst von Shunjie Zhu und 3 weiteren Autor:innen. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Pilot Technology Pre-Research Project of Wuxi Industrial Innovation Research Institute, Wuxi Young Scientific and Technological Talent Support Initiative.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Repetitive contouring in precision manufacturing is commonly judged by tolerance-band compliance rather than exact coincidence with a nominal centerline, while actuator limits and high-curvature regions may cause localized tube violations. This paper develops a tolerance-aware spatial iterative learning control framework that embeds the tolerance specification directly into the learning process through an arc-length-domain tolerance tube and a bounded normal reference-shaping variable. An alternating projection strategy is introduced to update the feedforward input and B-spline shaping coefficients, thereby coupling contour-error reduction with input feasibility and tube-admissible reference adaptation. The projected updates are shown to preserve feasibility, and bounded-perturbation robustness is established for practical arc-length-domain uncertainties. Experiments on a precision laser-marking platform demonstrate that the proposed method outperforms PID control and fixed-reference Norm-Optimal ILC in terms of RMS normal contour error, violation rate, and tube-compliance performance.

Förderung

  • Pilot Technology Pre-Research Project of Wuxi Industrial Innovation Research Institute
  • Wuxi Young Scientific and Technological Talent Support Initiative

Zitieren

APA

Zhu, S., Wang, L., Chen, Y., & Xie, Q. (2026). Tolerance Compliant Repetitive Contouring Through Spatial Iterative Learning and Reference Shaping. Symmetry, 18(6), 965. https://doi.org/10.3390/sym18060965

Vancouver

Zhu S, Wang L, Chen Y, Xie Q. Tolerance Compliant Repetitive Contouring Through Spatial Iterative Learning and Reference Shaping. Symmetry. 2026;18(6):965. doi:10.3390/sym18060965

BibTeX
@article{Zhu2026,
  author = {Zhu, Shunjie and Wang, Lei and Chen, Yiyang and Xie, Qian},
  title = {Tolerance Compliant Repetitive Contouring Through Spatial Iterative Learning and Reference Shaping},
  journal = {Symmetry},
  year = {2026},
  volume = {18},
  number = {6},
  pages = {965},
  doi = {10.3390/sym18060965}
}
Kostenlos starten →