Dynamic Modeling of Planetary Gear Reducer in High-Torque Hub Drive System
Symmetry · 28.02.2026 · 18 (3) · 429
DOI: 10.3390/sym18030429 ↗Kurz gefasst
Fachartikel in der Zeitschrift Symmetry, online erschienen am 28.02.2026. Verfasst von Fang Li und 4 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of the Higher Education Institutions of Jiangsu Province, China, Scientific Research Foundation for High-level Talents of Nanjing Institute of Technology.
Abstract (Originalsprache)
The hub drive system has emerged as a promising development orientation for future vehicles, with the planetary gear reducer serving as its key power transmission component. Considering the complexity of the reducer’s dynamic characteristics under high-torque conditions, this study establishes a lumped parameter translational–torsional coupling dynamic model for the two-stage planetary gear reducer based on Lagrange’s dynamic equations, incorporating critical nonlinear factors such as time-varying meshing stiffness and tooth clearance. No-load vibration tests were conducted to collect vibration acceleration of the secondary planet carrier and the primary ring gear under the operating condition of the primary sun gear rotating at 606 r/min. Experimental verification indicates that the errors between the simulation results and experimental acceleration amplitudes are 9.09% and 14.63%, respectively, confirming the validity and reliability of the theory model. This translational–torsional coupling dynamic model provides significant theoretical support for the dynamic optimization design, vibration control, and performance improvement of reducers in high-torque hub drive systems.
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of the Higher Education Institutions of Jiangsu Province, China
- Scientific Research Foundation for High-level Talents of Nanjing Institute of Technology
Zitieren
APA
Li, F., Du, X., Jiao, H., Zhang, J., & Fu, Q. (2026). Dynamic Modeling of Planetary Gear Reducer in High-Torque Hub Drive System. Symmetry, 18(3), 429. https://doi.org/10.3390/sym18030429
Vancouver
Li F, Du X, Jiao H, Zhang J, Fu Q. Dynamic Modeling of Planetary Gear Reducer in High-Torque Hub Drive System. Symmetry. 2026;18(3):429. doi:10.3390/sym18030429
BibTeX
@article{Li2026,
author = {Li, Fang and Du, Xiaofei and Jiao, Haoyu and Zhang, Jianrun and Fu, Qidi},
title = {Dynamic Modeling of Planetary Gear Reducer in High-Torque Hub Drive System},
journal = {Symmetry},
year = {2026},
volume = {18},
number = {3},
pages = {429},
doi = {10.3390/sym18030429}
}
EUVIMED