EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Symmetric Taper Fiber Cleaving for Centered Waist-Inserted FPI: Temperature-Compensated High-Sensitivity Strain Sensor

Xuntao Yu, Weijie Kong, Yunfeng Zhang, Hongqi Yuan, Jingwei Lv, Chao Liu, Miao Liu, Paul K. Chu

Symmetry · 10.08.2025 · 17 (8) · 1284

DOI: 10.3390/sym17081284 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Symmetry, online erschienen am 10.08.2025. Verfasst von Xuntao Yu und 7 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Heilongjiang Provincial Natural Science Foundation of China, Local Universities Reformation and Development Personnel Training Supporting Project from Central Authorities.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A highly sensitive Fabry–Pérot interferometer (FPI) is fabricated via symmetric taper fiber cleaving and centered waist-inserted assembly, a design where geometric symmetry is fundamental to the sensor’s performance. The FPI is fabricated by simple and cost-effective techniques, including fiber cleaving, splicing, and tapering. Due to the ultra-long cantilever beam with an effective length of 2.33 mm and the ultra-short Fabry–Pérot (FP) cavity with an actual length of 13.98 μm, the sensor exhibits an ultra-high strain sensitivity of 544.57 pm/με in experimental results. The sensor boasts a small temperature sensitivity of 1.02 pm/°C and a cross-temperature sensitivity of 0.0019 µε/°C in the temperature range of 25–200 °C. Furthermore, the sensor has good stability and repeatability. Owing to the symmetry-enhanced design, simple fabrication process, high strain sensitivity, as well as a stable, linearly proportional response over an extensive strain regime, the device has large potential in various sensing applications.

Förderung

  • National Natural Science Foundation of China
  • Heilongjiang Provincial Natural Science Foundation of China
  • Local Universities Reformation and Development Personnel Training Supporting Project from Central Authorities
  • City University of Hong Kong Donation Research Grants

Zitieren

APA

Yu, X., Kong, W., Zhang, Y., Yuan, H., Lv, J., Liu, C., Liu, M., & Chu, P. K. (2025). Symmetric Taper Fiber Cleaving for Centered Waist-Inserted FPI: Temperature-Compensated High-Sensitivity Strain Sensor. Symmetry, 17(8), 1284. https://doi.org/10.3390/sym17081284

Vancouver

Yu X, Kong W, Zhang Y, Yuan H, Lv J, Liu C, et al. Symmetric Taper Fiber Cleaving for Centered Waist-Inserted FPI: Temperature-Compensated High-Sensitivity Strain Sensor. Symmetry. 2025;17(8):1284. doi:10.3390/sym17081284

BibTeX
@article{Yu2025,
  author = {Yu, Xuntao and Kong, Weijie and Zhang, Yunfeng and Yuan, Hongqi and Lv, Jingwei and Liu, Chao and Liu, Miao and Chu, Paul K.},
  title = {Symmetric Taper Fiber Cleaving for Centered Waist-Inserted FPI: Temperature-Compensated High-Sensitivity Strain Sensor},
  journal = {Symmetry},
  year = {2025},
  volume = {17},
  number = {8},
  pages = {1284},
  doi = {10.3390/sym17081284}
}
Kostenlos starten →