The Formation Mechanism of Residual Stress in Friction Stir Welding Based on Thermo-Mechanical Coupled Simulation
Symmetry · 10.06.2025 · 17 (6) · 917
DOI: 10.3390/sym17060917 ↗Kurz gefasst
Fachartikel in der Zeitschrift Symmetry, online erschienen am 10.06.2025. Verfasst von Tianlei Yang und 5 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities, China Postdoctoral Science Foundation.
Abstract (Originalsprache)
Friction Stir Welding (FSW) is widely used for high-strength aluminum alloys due to its solid-state bonding, which ensures superior weld quality and service stability. However, thermo-mechanical interactions during welding can induce complex residual stress distributions, compromising joint integrity. Previous studies have primarily focused on thermal load-driven stress evolution, often neglecting mechanical factors such as the shear force generated by the stirring pin. This study develops a three-dimensional thermo-mechanical coupled finite element model based on a moving heat source. The model incorporates axial pressure from the tool shoulder and torque-derived shear force from the stirring pin. A hybrid surface–volumetric heat source is applied to represent frictional heating, and realistic mechanical boundary conditions are introduced to reflect actual welding conditions. Simulations on AA6061-T6 aluminum alloy show that under stable welding, the peak temperature in the weld zone reaches approximately 453 °C. Residual stress analysis indicates a longitudinal tensile peak of ~170 MPa under thermal loading alone, which reduces to ~150 MPa when mechanical loads are included, forming a characteristic M-shaped distribution. Further comparison with a Coupled Eulerian–Lagrangian (CEL) model reveals stress asymmetry, with higher tensile stress on the advancing side. This is primarily attributed to the directional shear force, which promotes greater plastic deformation on the advancing side than on the retreating side. The consistency between the proposed model and CEL results confirms its validity. This study provides a reliable framework for residual stress prediction in FSW and supports process parameter optimization.
Förderung
- National Natural Science Foundation of China
- Fundamental Research Funds for the Central Universities
- China Postdoctoral Science Foundation
Zitieren
APA
Yang, T., Wei, X., Zhou, J., Jiang, H., Liu, X., & Man, Z. (2025). The Formation Mechanism of Residual Stress in Friction Stir Welding Based on Thermo-Mechanical Coupled Simulation. Symmetry, 17(6), 917. https://doi.org/10.3390/sym17060917
Vancouver
Yang T, Wei X, Zhou J, Jiang H, Liu X, Man Z. The Formation Mechanism of Residual Stress in Friction Stir Welding Based on Thermo-Mechanical Coupled Simulation. Symmetry. 2025;17(6):917. doi:10.3390/sym17060917
BibTeX
@article{Yang2025,
author = {Yang, Tianlei and Wei, Xiao and Zhou, Jiangfan and Jiang, Hao and Liu, Xinyu and Man, Zongzhe},
title = {The Formation Mechanism of Residual Stress in Friction Stir Welding Based on Thermo-Mechanical Coupled Simulation},
journal = {Symmetry},
year = {2025},
volume = {17},
number = {6},
pages = {917},
doi = {10.3390/sym17060917}
}
EUVIMED