EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Symmetry-Driven Fault-Tolerant Synchronization in Multi-Robot Systems: Comparative Simulation of Adaptive Neural and Classical Controllers

Claudio Urrea, Pablo Sari

Symmetry · 13.04.2025 · 17 (4) · 591

DOI: 10.3390/sym17040591 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Symmetry, online erschienen am 13.04.2025. Verfasst von Claudio Urrea und 1 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents a framework for designing symmetry-aware cooperative controllers to synchronize two SCARA LS3-B401S robots, ensuring precision, adaptability, and fault tolerance in flexible manufacturing environments. Four control strategies—Proportional–Integral–Derivative (PID), Adaptive Sliding Mode Control (ASMC), Adaptation-Enabled Neural Network (ANN), and Inverse-Dynamics with Disturbance Observer (ID-DO)—were evaluated through high-fidelity MATLAB/Simulink simulations (fixed 1 ms step size, ode4 solver), using dynamic SolidWorks 2022 models validated under realistic perturbations, including ±0.0005 rad sensor noise and ±5% mass variation. Among the strategies, the ANN controller—implemented as an 8-10-4 multi-layer perceptron—achieved the highest performance, consistently reducing trajectory errors by over 99%, maintaining symmetry deviations below 0.001 rad, and recovering from ±0.08 rad disturbances in 0.12 s. Its stabilization time averaged 0.247 s across joints, and energy consumption dropped to 0.01 J/s, representing a 98% improvement over PID. Despite a higher computational load (12.5 MFLOPS, 2.80 ms per iteration), GPU acceleration brought execution times below 1.4 ms, ensuring compliance with industrial 5 ms control cycles. These results establish a scalable foundation for next-generation multi-robot systems, with planned physical validation on SCARA LS3-B401S robots equipped with high-resolution encoders and advanced processors. By leveraging symmetry-driven coordination (S=I), the proposed framework supports resilient, sustainable, and high-precision manufacturing, aligned with the goals of Industry 5.0.

Zitieren

APA

Urrea, C., & Sari, P. (2025). Symmetry-Driven Fault-Tolerant Synchronization in Multi-Robot Systems: Comparative Simulation of Adaptive Neural and Classical Controllers. Symmetry, 17(4), 591. https://doi.org/10.3390/sym17040591

Vancouver

Urrea C, Sari P. Symmetry-Driven Fault-Tolerant Synchronization in Multi-Robot Systems: Comparative Simulation of Adaptive Neural and Classical Controllers. Symmetry. 2025;17(4):591. doi:10.3390/sym17040591

BibTeX
@article{Urrea2025,
  author = {Urrea, Claudio and Sari, Pablo},
  title = {Symmetry-Driven Fault-Tolerant Synchronization in Multi-Robot Systems: Comparative Simulation of Adaptive Neural and Classical Controllers},
  journal = {Symmetry},
  year = {2025},
  volume = {17},
  number = {4},
  pages = {591},
  doi = {10.3390/sym17040591}
}
Kostenlos starten →