A Microstructural Study of Cu-10Al-7Ag Shape Memory Alloy in As-Cast and Quenched Conditions
Symmetry · 02.05.2024 · 16 (5) · 545
DOI: 10.3390/sym16050545 ↗Kurz gefasst
Fachartikel in der Zeitschrift Symmetry, online erschienen am 02.05.2024. Verfasst von Lovro Liverić und 4 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Rijeka.
Abstract (Originalsprache)
Shape memory alloys (SMAs) represent an exceptional class of smart materials as they are able to recover their shape after mechanical deformation, making them suitable for use in actuators, sensors and smart devices. These unique properties are due to the thermoelastic martensitic transformation that can occur during both thermal and mechanical deformation. Cu-based SMAs, especially those incorporating Al and Ag, are attracting much attention due to their facile production and cost-effectiveness. Among them, Cu-Al-Ag SMAs stand out due to their notably high temperature range for martensitic transformation. In this study, a Cu-based SMA with a new ternary composition of Cu-10Al-7Ag wt.% was prepared by arc melting and the samples cut from this casting alloy were quenched in water. Subsequently, the phase composition and the development of the microstructure were investigated. In addition, the morphology of the martensite was studied using advanced techniques such as electron backscatter diffraction (EBSD) and transmission electron microscopy (TEM). The analyzes confirmed the presence of martensitic structures in both samples; mainly 18R (β1′) martensite was present but a small volume fraction of (γ1′) martensite also was noticed in the as-quenched sample. The observation of fine, twinned martensite plates in the SMA alloy with symmetrically occurring basal plane traces between the twin variants underlines the inherent correlation between microstructural symmetry and the properties of the material and provides valuable insights into its behavior. The hardness of the quenched sample was found to be lower than the as-cast counterpart, which can be linked to the solutioning of Ag particles during the heat treatment.
Förderung
- University of Rijeka
Zitieren
APA
Liverić, L., Sitek, W., Snopiński, P., Maziarz, W., & Grgurić, T. H. (2024). A Microstructural Study of Cu-10Al-7Ag Shape Memory Alloy in As-Cast and Quenched Conditions. Symmetry, 16(5), 545. https://doi.org/10.3390/sym16050545
Vancouver
Liverić L, Sitek W, Snopiński P, Maziarz W, Grgurić TH. A Microstructural Study of Cu-10Al-7Ag Shape Memory Alloy in As-Cast and Quenched Conditions. Symmetry. 2024;16(5):545. doi:10.3390/sym16050545
BibTeX
@article{Liveri2024,
author = {Liverić, Lovro and Sitek, Wojciech and Snopiński, Przemysław and Maziarz, Wojciech and Grgurić, Tamara Holjevac},
title = {A Microstructural Study of Cu-10Al-7Ag Shape Memory Alloy in As-Cast and Quenched Conditions},
journal = {Symmetry},
year = {2024},
volume = {16},
number = {5},
pages = {545},
doi = {10.3390/sym16050545}
}
EUVIMED