Bio-Based Cellulose/Lignin–Tannin Membranes for Sustainable Water Purification
Sustainable Chemistry · 14.10.2026 · 7 (4) · 63
DOI: 10.3390/suschem7040063 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sustainable Chemistry, online erschienen am 14.10.2026. Verfasst von Aleksandar Marinković und 6 weiteren Autor:innen. Die Arbeit nennt 114 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science, Technological Development, and Innovation.
Abstract (Originalsprache)
This study reports the development, optimization and mechanistic evaluation of bio-based cellulose/lignin–tannin membrane adsorbents for the removal of representative inorganic and organic water pollutants: Cr(VI), Pb2+, difenoconazole (DFC) and bisphenol A (BPA). Waste cellulose fibers (wCF) from cigarette-package paperboard were converted into reactive membrane constituents by amino/ester and epoxy functionalization and subsequently cross-linked with epoxy-modified kraft lignin (EpKL), with or without tannic acid (TA), yielding wCF/EpKL and wCF/EpKL/TA membranes. Response surface methodology was used to optimize formulation parameters, while structural, morphological, and physicochemical analyses supported successful functionalization, cross-linking, and formation of porous, structurally modified surfaces. At 298 K, the Langmuir adsorption capacities of wCF/EpKL/wCF/EpKL/TA reached 85.37/88.78 mg g−1 for Cr(VI), 155.6/163.9 mg g−1 for Pb2+, 51.80/84.49 mg g−1 for DFC, and 194.4/195.4 mg g−1 for BPA, respectively. Isotherm, kinetic, and thermodynamic analyses indicated favorable, heterogeneous, and spontaneous adsorption involving specific surface interactions and diffusion-related contributions. Spectroscopy-supported mechanistic interpretation suggested that metal species are retained mainly through complexation with amino, phenolic, and oxygen-containing groups, together with electrostatic interactions, whereas DFC and BPA adsorption involves hydrogen bonding, hydrophobic interactions, and π–π interactions with lignin/tannin aromatic domains. Fixed-bed experiments confirmed the applicability of the membranes under continuous-flow conditions, while regeneration, stabilization/degradation, and soil-burial tests supported their potential within a more sustainable water treatment cycle. Overall, the results demonstrate that waste-derived cellulose/lignin–tannin membranes are promising regenerable sorbents for the adsorption of chemically diverse inorganic and organic pollutants.
Förderung
- Ministry of Science, Technological Development, and Innovation
Zitieren
APA
Marinković, A., Bošnjaković, J., Filipović, A., Kesar, A., Bugarčić, M., Veličković, Z., & Milošević, M. (2026). Bio-Based Cellulose/Lignin–Tannin Membranes for Sustainable Water Purification. Sustainable Chemistry, 7(4), 63. https://doi.org/10.3390/suschem7040063
Vancouver
Marinković A, Bošnjaković J, Filipović A, Kesar A, Bugarčić M, Veličković Z, et al. Bio-Based Cellulose/Lignin–Tannin Membranes for Sustainable Water Purification. Sustainable Chemistry. 2026;7(4):63. doi:10.3390/suschem7040063
BibTeX
@article{Marinkovi2026,
author = {Marinković, Aleksandar and Bošnjaković, Jovana and Filipović, Ana and Kesar, Andjela and Bugarčić, Mladen and Veličković, Zlate and Milošević, Milena},
title = {Bio-Based Cellulose/Lignin–Tannin Membranes for Sustainable Water Purification},
journal = {Sustainable Chemistry},
year = {2026},
volume = {7},
number = {4},
pages = {63},
doi = {10.3390/suschem7040063}
}
EUVIMED