One Step Synthesis of Ball-Milled La0.6Ca0.4FeO3 Perovskite for CO2 Conversion via Reverse Water–Gas Shift Chemical Looping
Sustainable Chemistry · 16.07.2026 · 7 (3) · 35
DOI: 10.3390/suschem7030035 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sustainable Chemistry, online erschienen am 16.07.2026. Verfasst von Hanzhong Shi und 4 weiteren Autor:innen. Die Arbeit nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NSF, Florida High Tech Corridor.
Abstract (Originalsprache)
This study investigates the synthesis of La0.6Ca0.4FeO3 (LCF) perovskite via a ball milling method for application in reverse water–gas shift chemical looping (RWGS-CL) for CO2-to-CO conversion. Unlike conventional wet-chemical routes such as the Pechini method, the ball milling approach offers a solvent-free, scalable synthesis using low-cost metal oxide precursors (e.g., La2O3, CaO, Fe2O3). Structural analysis by XRD confirmed the successful formation of single-phase cubic perovskite, with no secondary phases when using oxide precursors. Crystallite size increased with calcination temperature, from 118.9 Å (no calcination) to 404.3 Å (1050 °C). BET analysis revealed a decrease in surface area from 2.5 m2/g (no calcination) to 0.51 m2/g (1050 °C), consistent with sintering at higher temperatures. TPR-H2 and TPO-CO2 studies revealed that non-calcined LCF possesses slightly enhanced redox properties, with oxygen vacancy formation and CO2 reoxidation activity both at 500 °C. RWGS-CL experiments demonstrate that all LCF samples exhibit stable CO production (910–970 µmol/gLCF) over multiple cycles at 500 °C, with comparable performance across calcination conditions. A cost and sensitivity analysis reveals that the ball milling method had lower synthesis costs by approximately 92% at the laboratory-scale and 88% at the industrial-scale compared to the Pechini method, highlighting its strong potential for large-scale perovskite production.
Förderung
- NSF
- Florida High Tech Corridor
Zitieren
APA
Shi, H., Pimenta, F., Singh, P., Bhethanabotla, V. R., & Kuhn, J. N. (2026). One Step Synthesis of Ball-Milled La0.6Ca0.4FeO3 Perovskite for CO2 Conversion via Reverse Water–Gas Shift Chemical Looping. Sustainable Chemistry, 7(3), 35. https://doi.org/10.3390/suschem7030035
Vancouver
Shi H, Pimenta F, Singh P, Bhethanabotla VR, Kuhn JN. One Step Synthesis of Ball-Milled La0.6Ca0.4FeO3 Perovskite for CO2 Conversion via Reverse Water–Gas Shift Chemical Looping. Sustainable Chemistry. 2026;7(3):35. doi:10.3390/suschem7030035
BibTeX
@article{Shi2026,
author = {Shi, Hanzhong and Pimenta, Fernanda and Singh, Prabhsimran and Bhethanabotla, Venkat R. and Kuhn, John N.},
title = {One Step Synthesis of Ball-Milled La0.6Ca0.4FeO3 Perovskite for CO2 Conversion via Reverse Water–Gas Shift Chemical Looping},
journal = {Sustainable Chemistry},
year = {2026},
volume = {7},
number = {3},
pages = {35},
doi = {10.3390/suschem7030035}
}
EUVIMED