EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Valorization of Thermoplastic Polyurethane and Styrofoam Waste for Development of Improved Sustainable Blend Membranes

Tutik Sriani, Tatiya Wannomai, Thanongsak Thepsonthi, Chandrawati Putri Wulandari, Rizky Astari Rahmania, Muslim Mahardika, Norihisa Miki, Gunawan Setia Prihandana

Sustainable Chemistry · 19.06.2026 · 7 (2) · 27

DOI: 10.3390/suschem7020027 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sustainable Chemistry, online erschienen am 19.06.2026. Verfasst von Tutik Sriani und 7 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universitas Airlangga through the Hibah International Research Network program.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aimed to improve the mechanical integrity of Styrofoam membranes fabricated from post-consumer food packaging. To this end, 3D-printing byproduct—thermoplastic polyurethane (TPU) waste—was blended with polyimide (PI) in the membrane dope solution. The synthesized flat-sheet upcycled membranes were evaluated via scanning electron microscopy (SEM), water contact angle (WCA), and tensile testing, while separation efficiency was determined through bovine serum albumin (BSA) rejection and permeation trials. Findings indicate that incorporating TPU into the Styrofoam/PI matrix increased tensile strength by 50%, BSA rejection by 12.4%, and permeation by 33%. Compared with pristine Styrofoam membranes, tensile strength and BSA rejection improved by 240% and 46%, respectively. Although the blend membranes exhibited a reduction in water flux (from 214 to 162.5 LMH/bar) due to pore contraction, they maintained high rejection rates (~86%) for large macromolecules like PVP (1300 kDa). Furthermore, while all membranes remained hydrophilic, hydrophobicity scaled with TPU concentration.

Förderung

  • Universitas Airlangga through the Hibah International Research Network program

Zitieren

APA

Sriani, T., Wannomai, T., Thepsonthi, T., Wulandari, C. P., Rahmania, R. A., Mahardika, M., Miki, N., & Prihandana, G. S. (2026). Valorization of Thermoplastic Polyurethane and Styrofoam Waste for Development of Improved Sustainable Blend Membranes. Sustainable Chemistry, 7(2), 27. https://doi.org/10.3390/suschem7020027

Vancouver

Sriani T, Wannomai T, Thepsonthi T, Wulandari CP, Rahmania RA, Mahardika M, et al. Valorization of Thermoplastic Polyurethane and Styrofoam Waste for Development of Improved Sustainable Blend Membranes. Sustainable Chemistry. 2026;7(2):27. doi:10.3390/suschem7020027

BibTeX
@article{Sriani2026,
  author = {Sriani, Tutik and Wannomai, Tatiya and Thepsonthi, Thanongsak and Wulandari, Chandrawati Putri and Rahmania, Rizky Astari and Mahardika, Muslim and Miki, Norihisa and Prihandana, Gunawan Setia},
  title = {Valorization of Thermoplastic Polyurethane and Styrofoam Waste for Development of Improved Sustainable Blend Membranes},
  journal = {Sustainable Chemistry},
  year = {2026},
  volume = {7},
  number = {2},
  pages = {27},
  doi = {10.3390/suschem7020027}
}
Kostenlos starten →