EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Surface Engineering of PEEK Using Ultrashort Laser Pulses: A Pathway to Enhanced Cellular Response

Liliya Angelova, Flora Lemaire, Halima Kerdjoudj, Aleksandra Zhelyazkova, Albena Daskalova

Surfaces · 22.07.2026 · 9 (3) · 67

DOI: 10.3390/surfaces9030067 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Surfaces, online erschienen am 22.07.2026. Verfasst von Liliya Angelova und 4 weiteren Autor:innen. Die Arbeit nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: BULGARIAN NATIONAL SCIENCE FUND.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polyetheretherketone (PEEK) has emerged as a promising biomaterial for orthopedic and craniofacial implants due to its favorable mechanical properties and fatigue resistance; however, its inherent chemical inertness limits effective osseointegration. In this study, femtosecond laser surface modification is explored as a strategy to enhance the bioactivity of PEEK. Based on a previously performed parametric study, controlled micro- and nanoscale surface textures were fabricated using femtosecond laser processing, enabling precise tuning of surface roughness and wettability without the need for additional chemical treatment. The modified surfaces were systematically characterized in terms of morphology, composition, and topography using scanning electron microscopy (SEM), 3D profilometry, and water contact angle measurements. Four optimized femtosecond laser-generated surface architectures were selected for the present investigation and comprehensively characterized, followed by in vitro evaluation of dental pulp stem cell adhesion, morphology, and proliferation. The results indicate that laser-induced micro/nanostructuring enhances the surface properties of PEEK, while supporting cellular attachment and favorable cell–surface interaction. Differences in the biological response were observed among the optimized laser-textured surfaces. These findings highlight the feasibility of femtosecond laser texturing as a clean, reproducible, and scalable approach for the development of next-generation, personalized orthopedic implants.

Förderung

  • BULGARIAN NATIONAL SCIENCE FUND

Zitieren

APA

Angelova, L., Lemaire, F., Kerdjoudj, H., Zhelyazkova, A., & Daskalova, A. (2026). Surface Engineering of PEEK Using Ultrashort Laser Pulses: A Pathway to Enhanced Cellular Response. Surfaces, 9(3), 67. https://doi.org/10.3390/surfaces9030067

Vancouver

Angelova L, Lemaire F, Kerdjoudj H, Zhelyazkova A, Daskalova A. Surface Engineering of PEEK Using Ultrashort Laser Pulses: A Pathway to Enhanced Cellular Response. Surfaces. 2026;9(3):67. doi:10.3390/surfaces9030067

BibTeX
@article{Angelova2026,
  author = {Angelova, Liliya and Lemaire, Flora and Kerdjoudj, Halima and Zhelyazkova, Aleksandra and Daskalova, Albena},
  title = {Surface Engineering of PEEK Using Ultrashort Laser Pulses: A Pathway to Enhanced Cellular Response},
  journal = {Surfaces},
  year = {2026},
  volume = {9},
  number = {3},
  pages = {67},
  doi = {10.3390/surfaces9030067}
}
Kostenlos starten →