EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Surface-Condition-Driven Fatigue Performance of Laser Powder Bed Fusion-Manufactured Alloys

Samuel Onimpa Alfred

Surfaces · 19.07.2026 · 9 (3) · 65

DOI: 10.3390/surfaces9030065 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Surfaces, online erschienen am 19.07.2026. Verfasst von Samuel Onimpa Alfred. Die Arbeit nennt 140 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Laser powder bed fusion produces geometrically complex metallic components, yet fatigue performance consistently falls below that of wrought counterparts. Surface condition, encompassing as-built roughness, residual stress, porosity, microstructure, and oxide layers, is the dominant factor driving this deficit. This review critically examines surface-driven fatigue mechanisms across Ti-6Al-4V, IN718, AlSi10Mg, and 316L alloys. Post-processing strategies, including mechanical polishing, peening, electrochemical polishing, laser polishing, burnishing, and hybrid approaches, are systematically evaluated. The mechanistic roles of surface roughness as a stress concentrator, near-surface porosity as a crack initiation site, and compressive residual stress as a crack-closure mechanism are discussed. Emerging burnishing techniques, particularly electrical current-assisted burnishing, have demonstrated fatigue life improvements of up to five-fold relative to as-built components. These findings underscore the potential of thermo-mechanical surface modification while emphasizing the need for broader validation across a wider range of alloys and loading conditions. Finally, this review identifies critical research gaps, notably the lack of standardized surface characterization protocols and the limited understanding of fatigue under multiaxial and variable-amplitude loading for surface-treated L-PBF parts, and outlines directions for future work.

Zitieren

APA

Alfred, S. O. (2026). Surface-Condition-Driven Fatigue Performance of Laser Powder Bed Fusion-Manufactured Alloys. Surfaces, 9(3), 65. https://doi.org/10.3390/surfaces9030065

Vancouver

Alfred SO. Surface-Condition-Driven Fatigue Performance of Laser Powder Bed Fusion-Manufactured Alloys. Surfaces. 2026;9(3):65. doi:10.3390/surfaces9030065

BibTeX
@article{Alfred2026,
  author = {Alfred, Samuel Onimpa},
  title = {Surface-Condition-Driven Fatigue Performance of Laser Powder Bed Fusion-Manufactured Alloys},
  journal = {Surfaces},
  year = {2026},
  volume = {9},
  number = {3},
  pages = {65},
  doi = {10.3390/surfaces9030065}
}
Kostenlos starten →