EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Continuous Preparation of Carbon Nanotubes/Carbon Fiber Reinforcement Using Fe-Ni Bimetallic Catalyst

Yanying Zhu, Yanxiang Wang, Jianwei Zhang, Jinghe Guo, Yingfan Li, Siao Xin, Ziyi Xu, Yanru Yuan, Dong Zhang

Surfaces · 24.08.2025 · 8 (3) · 60

DOI: 10.3390/surfaces8030060 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Surfaces, online erschienen am 24.08.2025. Verfasst von Yanying Zhu und 8 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key R&D Program of Shandong Province, China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Surface modification of carbon fibers (CFs) is a critical step in preparing carbon fiber-reinforced composites. This study developed a continuous experimental process that integrates electrochemical anodic oxidation and chemical vapor deposition to fabricate carbon nanotubes/carbon fiber (CNTs/CF) reinforcements. The effects of temperature and hydrogen flow rate during CNT growth on the resulting reinforcements were systematically investigated. The surface morphology and mechanical properties of the modified materials were characterized using scanning electron microscopy, Raman spectroscopy, and single-fiber tensile testing. Employing an Fe0.5Ni0.5 bimetallic catalyst under optimized conditions (550 °C, H2 flow rate: 0.45 mol/min, C2H2 flow rate: 0.30 mol/min), the resulting reinforcement exhibited an 8.7% increase in tensile strength compared to as-received CF.

Förderung

  • Key R&D Program of Shandong Province, China

Zitieren

APA

Zhu, Y., Wang, Y., Zhang, J., Guo, J., Li, Y., Xin, S., Xu, Z., Yuan, Y., & Zhang, D. (2025). Continuous Preparation of Carbon Nanotubes/Carbon Fiber Reinforcement Using Fe-Ni Bimetallic Catalyst. Surfaces, 8(3), 60. https://doi.org/10.3390/surfaces8030060

Vancouver

Zhu Y, Wang Y, Zhang J, Guo J, Li Y, Xin S, et al. Continuous Preparation of Carbon Nanotubes/Carbon Fiber Reinforcement Using Fe-Ni Bimetallic Catalyst. Surfaces. 2025;8(3):60. doi:10.3390/surfaces8030060

BibTeX
@article{Zhu2025,
  author = {Zhu, Yanying and Wang, Yanxiang and Zhang, Jianwei and Guo, Jinghe and Li, Yingfan and Xin, Siao and Xu, Ziyi and Yuan, Yanru and Zhang, Dong},
  title = {Continuous Preparation of Carbon Nanotubes/Carbon Fiber Reinforcement Using Fe-Ni Bimetallic Catalyst},
  journal = {Surfaces},
  year = {2025},
  volume = {8},
  number = {3},
  pages = {60},
  doi = {10.3390/surfaces8030060}
}
Kostenlos starten →