EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modelling the Effects of Seawater Injection for Injectivity Testing in Offshore CCS Wells: Formation Damage or Reservoir Enhancement?

Richard H. Worden

Sustainability · 12.11.2026 · 18 (22) · 11554

DOI: 10.3390/su182211554 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sustainability, online erschienen am 12.11.2026. Verfasst von Richard H. Worden. Die Arbeit nennt 74 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Before CO2 is injected into an offshore saline aquifer, well injectivity is typically tested by injecting seawater. Because seawater differs chemically and thermally from formation water, the geochemical effect of this injection is uncertain. Here, the outcome of seawater injection into the Bunter Sandstone Formation, the main CO2-storage aquifer of the UK Southern North Sea, has been assessed using kinetic reactive transport models built in PHREEQC. These geochemical models use an equal-pore-volume radial grid and a time-staged wellbore temperature boundary. Twenty 30-day simulations comprised the reference case, single-factor variants and a factorial design of the injection rate, flow geometry and injected-water temperature, supported by grid, surface-area and activity-model tests. In every case, anhydrite cement dissolved behind a sharp front, raising near-well porosity from fractional 0.200 to about 0.226, with only minor dolomite precipitation. The front advanced in proportion to the volume injected and the anhydrite dissolution capacity of the seawater: the injection rate and flow geometry controlled its distance, while the temperature and activity model controlled the dissolution capacity. Translated to permeability, the porosity change implies an illustrative 10–25% increase in near-well aqueous injectivity, which requires confirmation via reactive core-flood experiments. The radial-grid and factorial workflow can be adapted to any aquifer, but the mineral reactions must be reassessed for each site.

Zitieren

APA

Worden, R. H. (2026). Modelling the Effects of Seawater Injection for Injectivity Testing in Offshore CCS Wells: Formation Damage or Reservoir Enhancement?. Sustainability, 18(22), 11554. https://doi.org/10.3390/su182211554

Vancouver

Worden RH. Modelling the Effects of Seawater Injection for Injectivity Testing in Offshore CCS Wells: Formation Damage or Reservoir Enhancement?. Sustainability. 2026;18(22):11554. doi:10.3390/su182211554

BibTeX
@article{Worden2026,
  author = {Worden, Richard H.},
  title = {Modelling the Effects of Seawater Injection for Injectivity Testing in Offshore CCS Wells: Formation Damage or Reservoir Enhancement?},
  journal = {Sustainability},
  year = {2026},
  volume = {18},
  number = {22},
  pages = {11554},
  doi = {10.3390/su182211554}
}
Kostenlos starten →