Electrospun Recycled EPS/CNT Membranes Modified with an Imidazolium Silane: Processing, Wettability and Gravity-Driven Oil–Water Separation
Sustainability · 24.10.2026 · 18 (21) · 10813
DOI: 10.3390/su182110813 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sustainability, online erschienen am 24.10.2026. Verfasst von Souhail Zerouany und 9 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The conversion of expanded polystyrene (EPS) packaging waste into functional fibrous membranes offers a route for extending its use beyond conventional packaging applications. In this study, recycled EPS was electrospun with multi-walled carbon nanotubes (MWCNTs) and 1-methyl-3-[3-(triethoxysilyl)propyl]imidazolium chloride (MCPTS) to investigate the influence of modifier concentration on processing behavior and membrane properties. MWCNT content was fixed at 0.5 wt%, while MCPTS was varied from 1 to 9 wt% relative to EPS. MWCNT incorporation increased solution viscosity from 0.185 to 0.310 Pa·s. MCPTS produced a nonmonotonic response, with viscosity decreasing at 1–3 wt% before increasing to 0.340 Pa·s at 9 wt%. Scanning electron microscopy (SEM) showed interconnected fibrous deposits, and spectra obtained by Fourier transform infrared spectroscopy in attenuated total reflectance mode (FTIR-ATR) showed the characteristic spectral features of polystyrene. Apparent water contact angle (WCA) increased from 125.27 ± 0.57° for neat EPS to 148.77 ± 0.85° for EPS/CNT/MCPTS-9. In three gravity-driven tests using distinct membranes and an initial mixture of 5.0 mL motor oil and 5.0 mL water, EPS/CNT/MCPTS-9 achieved a mean volumetric oil recovery of 94.0 ± 0.4% and a mean batch flux of 15.26 ± 0.06 L m−2 h−1 over 30 min. MCPTS-containing specimens retained 97.46–99.34% of their initial mass after the specified 20 s direct flame exposure. These findings identify MCPTS loading as an effective formulation variable for modifying recycled EPS membrane wettability and demonstrate a laboratory-scale route linking plastic-waste valorization with gravity-driven oil–water separation.
Zitieren
APA
Zerouany, S., Serhrouchni, T. I., Bassiry, I., Bili, O., Kouali, C. E., Kalaaoui, K. E., Chaoui, M. A., Slassi, S., Hajji, L., & Gmouh, S. (2026). Electrospun Recycled EPS/CNT Membranes Modified with an Imidazolium Silane: Processing, Wettability and Gravity-Driven Oil–Water Separation. Sustainability, 18(21), 10813. https://doi.org/10.3390/su182110813
Vancouver
Zerouany S, Serhrouchni TI, Bassiry I, Bili O, Kouali CE, Kalaaoui KE, et al. Electrospun Recycled EPS/CNT Membranes Modified with an Imidazolium Silane: Processing, Wettability and Gravity-Driven Oil–Water Separation. Sustainability. 2026;18(21):10813. doi:10.3390/su182110813
BibTeX
@article{Zerouany2026,
author = {Zerouany, Souhail and Serhrouchni, Tariq Idrissi and Bassiry, Imane and Bili, Oumaima and Kouali, Chaimaà El and Kalaaoui, Khadija El and Chaoui, Mohamed Ait and Slassi, Siham and Hajji, Latifa and Gmouh, Said},
title = {Electrospun Recycled EPS/CNT Membranes Modified with an Imidazolium Silane: Processing, Wettability and Gravity-Driven Oil–Water Separation},
journal = {Sustainability},
year = {2026},
volume = {18},
number = {21},
pages = {10813},
doi = {10.3390/su182110813}
}
EUVIMED