From Combustion By-Product to Geotechnical Cement–Soil Composite: Computed Tomography-Informed Numerical Modelling and Experimental Validation
Sustainability · 22.07.2026 · 18 (14) · 7472
DOI: 10.3390/su18147472 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sustainability, online erschienen am 22.07.2026. Verfasst von Grzegorz Piotr Kaczmarczyk und 1 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: AGH University of Krakow.
Abstract (Originalsprache)
The partial replacement of cement with waste-derived materials is a promising strategy for reducing cement consumption in soil–cement technologies and developing more sustainable construction materials. This study investigates fluidized bed bottom ash (BA), an industrial combustion by-product, as a partial Portland cement substitute in geotechnical cement–soil composites. Cement was replaced with BA at 5%, 10%, and 15% by mass, and specimens were tested after 3, 7, 14, and 28 days of curing. The research program combined SEM-EDS characterization, high-resolution X-ray computed tomography, uniaxial compression tests, in situ CT observations during loading, and FLAC3D mesoscale numerical modelling calibrated against experimental stress–strain curves and observed crack propagation. The results showed a non-monotonic effect of BA addition. Up to 10% BA, the median pore size remained relatively stable, whereas 15% BA increased porosity and enlarged the upper tail of the pore-size distribution. The calibrated model reproduced the global mechanical response with acceptable accuracy and captured main features of damage localization. The analyses are accompanied by a life cycle assessment (LCA). The study demonstrates that waste-modified cement–soil composites intended for sustainable soil stabilization should be evaluated not only by strength parameters, but also by internal structure, defect distribution, and environmental impact.
Förderung
- AGH University of Krakow
Zitieren
APA
Kaczmarczyk, G. P., & Cała, M. (2026). From Combustion By-Product to Geotechnical Cement–Soil Composite: Computed Tomography-Informed Numerical Modelling and Experimental Validation. Sustainability, 18(14), 7472. https://doi.org/10.3390/su18147472
Vancouver
Kaczmarczyk GP, Cała M. From Combustion By-Product to Geotechnical Cement–Soil Composite: Computed Tomography-Informed Numerical Modelling and Experimental Validation. Sustainability. 2026;18(14):7472. doi:10.3390/su18147472
BibTeX
@article{Kaczmarczyk2026,
author = {Kaczmarczyk, Grzegorz Piotr and Cała, Marek},
title = {From Combustion By-Product to Geotechnical Cement–Soil Composite: Computed Tomography-Informed Numerical Modelling and Experimental Validation},
journal = {Sustainability},
year = {2026},
volume = {18},
number = {14},
pages = {7472},
doi = {10.3390/su18147472}
}
EUVIMED