EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Model-Based Sizing of a Shipboard BESS for Zero-Emission Port Operations: Case Study of a Mediterranean Hybrid Ferry

Michela Costa, Gianluca Del Papa, Adolfo Palombo, Alessandro Petrillo, Ugo Sorge

Sustainability · 10.07.2026 · 18 (14) · 7067

DOI: 10.3390/su18147067 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sustainability, online erschienen am 10.07.2026. Verfasst von Michela Costa und 4 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: FIB FAAM S.p.A., DG Twin S.r.l., a spin-off of the National Research Council (CNR) of Italy.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The decarbonisation of short-sea passenger shipping is a central challenge within the broader transition toward intelligent and sustainable transportation systems. This paper presents a model-based design and techno-economic assessment of a Battery Energy Storage System (BESS) retrofitting a hybrid diesel-electric regional ferry operating the Naples-Ischia route (~19 nautical miles). An experimentally validated Equivalent Circuit Model (ECM) of a commercial LiFePO4 cell, parameterised through Hybrid Pulse Power Characterisation (HPPC) tests at 10 °C, 25 °C, and 40 °C and validated via Extended Kalman Filter State-of-Charge (SOC) estimation, is embedded into a full-vessel dynamic model. This last encompasses propulsion, power generation, electrical distribution and battery subsystems. Two energy management strategies are evaluated against the conventional diesel-electric baseline: Strategy 1 (S1), combining in-port BESS discharge with shore-grid recharging; Strategy 2 (S2), adding controlled in-navigation recharging when SOC falls below 20%. S1 is found to achieve a 17% annual CO2 reduction, while S2 yields superior 20-year economics, with annual net savings of ~€470,000, a simple payback period of 3.72 years, and ~6 battery replacements versus ~9 under S1. Also, adopting S2 allows maintaining a shallower average Depth of Discharge (DoD), namely ~40% vs. ~70% of S1. A multi-objective optimisation confirms that the proposed BESS layout occupies only 5% of the available garage area and satisfies Load Line Convention constraints without reducing commercial payload capacity. The presented integrated framework provides a replicable, multidisciplinary tool for BESS deployment across the Mediterranean short-sea ferry sector, directly contributing to the advancement of sustainable maritime transportation.

Förderung

  • FIB FAAM S.p.A.
  • DG Twin S.r.l., a spin-off of the National Research Council (CNR) of Italy

Zitieren

APA

Costa, M., Papa, G. D., Palombo, A., Petrillo, A., & Sorge, U. (2026). Model-Based Sizing of a Shipboard BESS for Zero-Emission Port Operations: Case Study of a Mediterranean Hybrid Ferry. Sustainability, 18(14), 7067. https://doi.org/10.3390/su18147067

Vancouver

Costa M, Papa GD, Palombo A, Petrillo A, Sorge U. Model-Based Sizing of a Shipboard BESS for Zero-Emission Port Operations: Case Study of a Mediterranean Hybrid Ferry. Sustainability. 2026;18(14):7067. doi:10.3390/su18147067

BibTeX
@article{Costa2026,
  author = {Costa, Michela and Papa, Gianluca Del and Palombo, Adolfo and Petrillo, Alessandro and Sorge, Ugo},
  title = {Model-Based Sizing of a Shipboard BESS for Zero-Emission Port Operations: Case Study of a Mediterranean Hybrid Ferry},
  journal = {Sustainability},
  year = {2026},
  volume = {18},
  number = {14},
  pages = {7067},
  doi = {10.3390/su18147067}
}
Kostenlos starten →