EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Wastewater Washed Mineral Waste and Sludge Ash Mixtures for Sustainable Construction Applications

Jacek Kostrzewa, Mirosław Szyłak-Szydłowski, Aneta Łukaszek-Chmielewska, Łukasz Kaczmarek, Paweł Popielski

Sustainability · 11.06.2026 · 18 (12) · 6001

DOI: 10.3390/su18126001 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sustainability, online erschienen am 11.06.2026. Verfasst von Jacek Kostrzewa und 4 weiteren Autor:innen. Die Arbeit nennt 81 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the face of the raw materials crisis and environmental concerns, sustainable waste management has become a priority for current and future generations. Recycling waste from wastewater treatment plants in a closed loop protects natural resources, reduces landfill volumes, and lowers disposal costs. This paper presents the results of tests on the physical, filtration, and mechanical properties of mixtures of washed mineral waste (WMW) from grit chambers with fly ash from the thermal treatment of municipal sewage sludge (SSA) in a fluidized bed furnace. Additionally, radiological tests of the mixture components were conducted. Based on the conducted tests, the possibility of sustainable use in civil engineering, such as soil backfills and embankment construction materials, was assessed. The possibility of safely using waste materials in the indicated construction solutions was demonstrated for mixtures with dominant WMW content (90% and 70% by total weight). The waste mixtures correspond to poorly or medium-grade sands with a small amount of silt (uniformity coefficients of 3.33, 3.50, and 8.00). They are characterized by maximum dry densities of 1.542, 1.770, and 1.780 g/cm3; optimal moisture contents of 12.54, 12.86, and 20.25%; permeability coefficients of 0.08, 0.22, and 0.39 m/d; and internal friction angles of 38.4, 39.5, and 40.1°. The values of the determined parameters of some mixtures are similar to those of natural sands used as construction aggregates. All mixtures meet the geotechnical criteria for use in road embankments, below frost depth, and in flood embankment bodies. Mixtures with a 90% mass fraction of WMW were also approved for application as backfill for installation trenches. However, none of the mixtures met the hydraulic conductivity threshold required for the upper layers of embankments nor for backfill of abutments and retaining structures without the use of an additional binder (cement or lime), which is considered a prerequisite for these applications.

Zitieren

APA

Kostrzewa, J., Szyłak-Szydłowski, M., Łukaszek-Chmielewska, A., Kaczmarek, Ł., & Popielski, P. (2026). Wastewater Washed Mineral Waste and Sludge Ash Mixtures for Sustainable Construction Applications. Sustainability, 18(12), 6001. https://doi.org/10.3390/su18126001

Vancouver

Kostrzewa J, Szyłak-Szydłowski M, Łukaszek-Chmielewska A, Kaczmarek Ł, Popielski P. Wastewater Washed Mineral Waste and Sludge Ash Mixtures for Sustainable Construction Applications. Sustainability. 2026;18(12):6001. doi:10.3390/su18126001

BibTeX
@article{Kostrzewa2026,
  author = {Kostrzewa, Jacek and Szyłak-Szydłowski, Mirosław and Łukaszek-Chmielewska, Aneta and Kaczmarek, Łukasz and Popielski, Paweł},
  title = {Wastewater Washed Mineral Waste and Sludge Ash Mixtures for Sustainable Construction Applications},
  journal = {Sustainability},
  year = {2026},
  volume = {18},
  number = {12},
  pages = {6001},
  doi = {10.3390/su18126001}
}
Kostenlos starten →