EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Additive Manufacturing of Sustainable Clay Bricks: A Critical Review of Technologies, Challenges, and Opportunities

Carlos F. Revelo Huertas, Henry A. Colorado, Sergio Neves Monteiro, Carlos M. F. Vieira

Sustainability · 25.05.2026 · 18 (11) · 5285

DOI: 10.3390/su18115285 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sustainability, online erschienen am 25.05.2026. Verfasst von Carlos F. Revelo Huertas und 3 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 114 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Conventional fired clay brick production is energy-intensive and associated with significant carbon emissions due to kiln firing and mass molding processes. In this context, extrusion-based additive manufacturing (AM), particularly Direct Ink Writing (DIW), has emerged as a potential alternative for shaping clay-based building units, enabling reduced material waste, the use of locally sourced clays and recycled additives, and the fabrication of complex geometries with enhanced thermal and structural performance. However, despite these advantages, the application of AM to clay bricks remains limited, as key challenges persist in terms of material rheology, interlayer bonding, production scalability, and the continued need for high-temperature firing, which constrains its environmental benefits. This study presents a scoping review of AM technologies applied to clay brick manufacturing, focusing on their technical feasibility, material requirements, and sustainability implications in comparison with conventional processes. Furthermore, current research trends are analyzed to identify existing gaps, particularly regarding industrial scalability and life cycle assessment (LCA), and to outline future research directions required for the development of a new generation of sustainable clay bricks.

Zitieren

APA

Huertas, C. F. R., Colorado, H. A., Monteiro, S. N., & Vieira, C. M. F. (2026). Additive Manufacturing of Sustainable Clay Bricks: A Critical Review of Technologies, Challenges, and Opportunities. Sustainability, 18(11), 5285. https://doi.org/10.3390/su18115285

Vancouver

Huertas CFR, Colorado HA, Monteiro SN, Vieira CMF. Additive Manufacturing of Sustainable Clay Bricks: A Critical Review of Technologies, Challenges, and Opportunities. Sustainability. 2026;18(11):5285. doi:10.3390/su18115285

BibTeX
@article{Huertas2026,
  author = {Huertas, Carlos F. Revelo and Colorado, Henry A. and Monteiro, Sergio Neves and Vieira, Carlos M. F.},
  title = {Additive Manufacturing of Sustainable Clay Bricks: A Critical Review of Technologies, Challenges, and Opportunities},
  journal = {Sustainability},
  year = {2026},
  volume = {18},
  number = {11},
  pages = {5285},
  doi = {10.3390/su18115285}
}
Kostenlos starten →