A Multi-Objective MATLAB–FEM Framework for Sustainable Impressed-Current Cathodic Protection of DC-Electrified Railway Infrastructure
Sustainability · 24.05.2026 · 18 (11) · 5275
DOI: 10.3390/su18115275 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sustainability, online erschienen am 24.05.2026. Verfasst von Apiwat Aussawamaykin und 1 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Suranaree University of Technology, Thailand Science Research and Innovation, National Science, Research and Innovation Fund.
Abstract (Originalsprache)
Stray-current corrosion from DC-electrified railways drives premature failure of buried metallic infrastructure (pipelines, foundations, tunnel reinforcement), causing resource waste, repair-driven carbon emissions and service disruptions that undermine the sustainability of urban transit corridors. Conventional impressed-current cathodic protection (ICCP) design relies on uniform-anode rules of thumb or closed commercial codes that cannot quantify the trade-off between protection uniformity, energy use and hardware cost. We present an open MATLAB framework that couples a custom 3D finite element method (FEM) solver with multi-objective particle swarm optimisation (MOPSO) and minimises three competing objectives simultaneously: total impressed current, RMS deviation from the protection target, and number of active anodes. A laboratory-calibrated coupling factor (CF=1.98, consistent with the image-method prediction of 2 for a highly conductive pipe inclusion) absorbs the pipe–soil interface kinetics into a single direct FEM solve, and a pre-computed Green’s-function basis accelerates each MOPSO evaluation by more than two orders of magnitude. The solver is validated against an instrumented prototype with RMSE =14.9 mV across ten Cu/CuSO4 saturated reference electrode (CSE) measurements, and applied to a 500 m DC traction line. At an identical total current of 20.30 A across five anodes, the optimised design achieves an RMSE of 86.6 mV against the −850 mV NACE target, whereas a conventional uniform layout produces severe over-protection (RMSE =1107 mV)—a twelve-fold reduction. The framework is recommended as a transparent, reproducible engineering tool that simultaneously extends pipeline service life and reduces rectifier energy demand, supporting UN Sustainable Development Goals 9 and 11 for sustainable urban-rail infrastructure.
Förderung
- Suranaree University of Technology
- Thailand Science Research and Innovation
- National Science, Research and Innovation Fund
Zitieren
APA
Aussawamaykin, A., & Pao-la-or, P. (2026). A Multi-Objective MATLAB–FEM Framework for Sustainable Impressed-Current Cathodic Protection of DC-Electrified Railway Infrastructure. Sustainability, 18(11), 5275. https://doi.org/10.3390/su18115275
Vancouver
Aussawamaykin A, Pao-la-or P. A Multi-Objective MATLAB–FEM Framework for Sustainable Impressed-Current Cathodic Protection of DC-Electrified Railway Infrastructure. Sustainability. 2026;18(11):5275. doi:10.3390/su18115275
BibTeX
@article{Aussawamaykin2026,
author = {Aussawamaykin, Apiwat and Pao-la-or, Padej},
title = {A Multi-Objective MATLAB–FEM Framework for Sustainable Impressed-Current Cathodic Protection of DC-Electrified Railway Infrastructure},
journal = {Sustainability},
year = {2026},
volume = {18},
number = {11},
pages = {5275},
doi = {10.3390/su18115275}
}
EUVIMED