EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimization of Microstructural, Mechanical, and Corrosion Properties of AlFeCuTiNi High-Entropy Alloy: The Influence of Mechanical Alloying Time and Sintering Temperature

Fatih Özer, Cengiz Temiz, Seyit Çağlar

Sustainability · 19.03.2026 · 18 (6) · 3029

DOI: 10.3390/su18063029 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sustainability, online erschienen am 19.03.2026. Verfasst von Fatih Özer und 2 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Zonguldak Bülent Ecevit University BAP Coordination Unit.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study reports the synthesis of a high-entropy AlFeCuTiNi alloy via high-energy ball milling. The study investigates the effects of mechanical alloying time and sintering temperature on the microstructure, mechanical properties, wear, and corrosion behavior of the high-entropy AlFeCuTiNi alloy. XRD, SEM, and EDX analyses revealed that the mechanical alloying time and sintering temperature significantly affected the alloy’s homogeneity, phase structure, and oxide film stability. As the mechanical alloying time increases, the corrosion resistance of alloys sintered at 550 °C initially increases and then stabilizes. In samples sintered at 650 °C, corrosion resistance is generally higher. The highest corrosion resistance was achieved after 15 h of mechanical alloying and sintering at 650 °C. The study reveals that the best corrosion, wear, hardness, and wear density performance was observed in samples obtained at medium conditions, achieved after 20 h of mechanical alloying and sintering at 650 °C. These findings may contribute to optimizing production processes for sustainable material design. Moreover, this research highlights that high-entropy alloys and powder-metallurgy-based production methods enable industrial applications for energy-efficient, sustainable material design and contribute to sustainable production and circular-economy principles.

Förderung

  • Zonguldak Bülent Ecevit University BAP Coordination Unit

Zitieren

APA

Özer, F., Temiz, C., & Çağlar, S. (2026). Optimization of Microstructural, Mechanical, and Corrosion Properties of AlFeCuTiNi High-Entropy Alloy: The Influence of Mechanical Alloying Time and Sintering Temperature. Sustainability, 18(6), 3029. https://doi.org/10.3390/su18063029

Vancouver

Özer F, Temiz C, Çağlar S. Optimization of Microstructural, Mechanical, and Corrosion Properties of AlFeCuTiNi High-Entropy Alloy: The Influence of Mechanical Alloying Time and Sintering Temperature. Sustainability. 2026;18(6):3029. doi:10.3390/su18063029

BibTeX
@article{zer2026,
  author = {Özer, Fatih and Temiz, Cengiz and Çağlar, Seyit},
  title = {Optimization of Microstructural, Mechanical, and Corrosion Properties of AlFeCuTiNi High-Entropy Alloy: The Influence of Mechanical Alloying Time and Sintering Temperature},
  journal = {Sustainability},
  year = {2026},
  volume = {18},
  number = {6},
  pages = {3029},
  doi = {10.3390/su18063029}
}
Kostenlos starten →